Subermersible- and groundwater pump 250 w (4 pages)
Summary of Contents for Trolla 12823
Page 1
Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may contain small parts, therefore save all packaging until the product is fully assembled. The product can be attached to the package be careful when unpacking the product is not damaged.
Page 2
When the pump intended to be connected to the water mains, additional backflow prevention device shall be set to prevent backsiphonage of non-potable water into the water mains. Commissioning After installing the pump as indicated in these instructions, it is ready to work. www.trolla.dk...
Page 3
Set up the pump on flat and firm ground.Attach the intake line ready for use. Fill the pump with water at the pressure connection. Plug into the mains. All shut-off devices in the pressure line (spray nozzles, valves etc.) must be fully opened when www.trolla.dk...
Page 4
Prevent intake of foreign body substances (filter). “Electrical products must not be thrown out with domestic waste. Recycle them at the special disposal centres provided for the purpose. Contact your local authorities or stockist for advice on recycling”. www.trolla.dk...
Need help?
Do you have a question about the 12823 and is the answer not in the manual?
Questions and answers