Advertisement
Quick Links
Advertisement
Summary of Contents for Kanguru QSX
- Page 1 Kanguru QSX Assembly Guide Copyright 2009, All Rights Reserved.
-
Page 2: Notices And Information
Copyright© 2009, Kanguru Solutions. All rights reserved. Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses incurred while using this product. The user himself is responsible for the copyright laws, and is fully responsible for any illegal actions taken. - Page 3 Preparation 1. Preparation Note: This guide is for assembling your QSX only. For complete instructions on using your drive after it is assembled, please refer to the User Guide. Before assembling your QSX, please check that you have the following items available on hand.
- Page 4 2. Assembling Your Kanguru QSX Please read these instructions carefully and make sure that you understand them before assembling your QSX. You may want to print a copy of these instruction to help facilitate the assembly process. Things to remember: •...
- Page 5 Assembling Your Kanguru QSX Carefully slide the Backplate/HDD Bracket assembly partially out of the housing (about 2 inches). caution! Do not try to pull the Backplate/HDD Bracket assembly completely out of the housing, there is a cable connecting the Backplate to the Faceplate.
- Page 6 Assembling Your Kanguru QSX Once you have removed the HDD Bracket from the housing, position the HDD Bracket over the Backplate as shown in figure 6. caution! Make sure that the cable connected to the Backplate does not get caught under the HDD Bracket.
- Page 7 Assembling Your Kanguru QSX Once your SATA HDDs are in place, use the eight HDD Screws provided to fasten the SATA HDDs to the HDD Bracket. figure 8: Fastening SATA HDDs to the HDD Bracket Once the SATA HDDs have been fastened to the HDD Bracket using the HDD Screws, detach the SATA HDD/HDD Bracket assembly from the Backplate.
- Page 8 Backplate does not get caught between the SATA connectors. figure 12: Replacing the Backplate Fasten the Backplate using the two screws that you removed during Step 3. Congratulations, you have successfully assembled your Kanguru QSX! Please refer to your User Guide for detailed information on using your QSX.
- Page 9 Kanguru Solutions 1360 Main Street Millis, MA 02054 www.kanguru.com 09.16.09 V1.0© 2009 Kanguru Solutions Legal terms and conditions available at www.kanguru.com. Please review and agree before use. Thank you.
Need help?
Do you have a question about the QSX and is the answer not in the manual?
Questions and answers