Access Lighting 20439LEDDLP Installation Instructions

cULus
CERTIFICATION: DAMP
access
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SECURITE A RESPECTURE
Before assembling your ACCESS LIGHTING fixture, please make sure that
you carefully read through this instruction sheet. Save this instruction sheet
and refer to it when additions to or changes in the fixture
configuration ore made.
ce
Lisez attentivement manuel d'instructions. Enregistrer cette feuifle
d'instructions et de s'y reterer lorsque fes ajouts au changements dons
de
la configuration montage sont faites.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR,
CONSULTER UN ELECTRIC/EN QUALIFIE POUR VOUS ASSURER QUE LES
CONDUCTEURS DE LA DERIVATION SONT ADEQUATS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIA R WITH THE CONSTRUCTION
AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE O'INSTALLATION PERTINENT,
PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT
A/NS/ QUE LES RISQUES INHERENTS
NOTE: The important safeguards and instructions that appear
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
core, are factors that can't be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
Read all instructions
Do not install this fixture in hazardous locations.
N'installez pas cet appareif dons des emplacements dangereux.
Do not install any fixture assembly closer than 6 inches from any
curtain or similar combustible material.
Laisser une distance d'au mains 6 pouces entre ce luminaire et la toute
surface combustible.
"WARNING Risk of Fire and Electric Shock."
"CAUTION: Risque d' lncendie et de Choe Electriques,"
GENERAL INFORMATION
Afl electrical connections must be in accordance with off ordinances,
Local and the U.S. National Electrical Codes (NEC}, These fixtures are
intended for mounting to a standard 4" metal octagon outlet box.
The box must be directly supported by the building structure and U.l.
Recognized.
in
this
STEP BY STEP INSTRUCTIONS
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
light off at the light switch is not sufficient to prevent electrical shock.
1
COLLECTION APPLICATION
Wall Fixture
Artemis
WHAT WE PROVIDE
Crossbar
•
Mounting Hardware
•
Fixture Assembly
•
• 7 x Glass Shade
I
2 X A 9 E-26 LED Bulbs
•
(20440LEDDLP, 204039LEDDLP J
Recommended Dimmers for Supplied Bulb
(EL VJ LUTRON Skylark SEL V-300P
(ML VJ COOPER Aspire 9530SW
(TR/AC} LEGRAND Titan CD703-PW
NO:
20440LEDDLP 20439LEDDLP
MODEL NO.
20440LEDDLP
20439LEDDLP
WHAT YOU NEED
Screwdriver
•
Wire Cutters
•
Wiring Supplies as Specified
•
by Electrical Code
106414-02-3