Changing Batteries; Technical Specifications; What Is In The Box; Warranty - Pro-Ject Audio Systems Measure It Instructions For Use

Changing batteries

Proceed as follows:
•
Slide open the battery case cover
•
Replace both batteries together. Make sure the batteries are the right way round
• Refit the battery case cover
Battery type: 2 x LR43 cells, 1,5V
If the stylus balance is not used over a long period of time the batteries should be removed.
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the
appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Measure it
Capacity
Variance
Weighting mode
Display
Calibration
Auto off
Replacement battery
Operating temperature

What is in the box

•
stylus balance
•
calibration weight
• 2 replacement batteries
• protection bag for the meter
•
user guide

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2007. All rights reserved.
0 - 5g
±0,002g
gram (1g = 10mN)
4 digit LCD with backlight
auto calibration using a 5g weight
120 seconds off
2 x LR43, 1,5V
0 - +40° C
© Audio Trade GmbH · Measure it · Revision 1.3.08/1.5.08
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
3