AC-DA14-AUHD User Manual AC-DA14-AUHD A full 4K60 4:4:4 (Up to 18GBPS) Distribution Amplifier with advanced EDID management * * Available in 1x2, 1x4, and 1x8 Page 1...
AC-DA14-AUHD Introduction AC-DA14-AUHD is 18GBPS, full bandwidth HDMI2.0a (HDR) with HDCP2.2 four-way HDMI splitter. Functionally, distributes the input HDMI signal to four identical HDMI outputs. These four outputs are synchronized. AC-DA14-AUHD has the ability of pre-emphasis and equalization. Multiple cascaded AC-DA14-AUHD achieves long distance transmission of HDMI signal of more than 15 meters even in 4K (HDR) resolution.
AC-DA14-AUHD Full 4K 60 (4:4:4) HDMI Splitter & Distribution Amplifier Product Overview ( Model Number: AC-DA14-AUHD) ■ Features ■ Easy to Use: Install in seconds, no need for setting. Distribution: One HDMI input, four identical HDMI outputs. Supports up to 18GBPS with resolutions of 4K60(YUV444), 4K30, 1080p, 1080i, 720p and other standard Video formats, PAL and NTSC.
AC-DA14-AUHD Package Contents ■ ① Main unit. P/N: AC-DA14-AUHD ② 5VDC Power Supply. ③ Mounting Ears Connections and Operations ■ Connect the HDMI input source into AC-DA14-AUHD Connect the HDMI output equipment (Displays) into AC-DA14-AUHD Insert the DC side of 5v power supply into AC-DA14-AUHD and then connect the AC side of the Power supply into the wall outlet.
AC-DA14-AUHD Back Panel ① Power input. ② HDMI input. ③ HDMI outputs (x4). Device Top Cover Device cover is labeled for DIP Switch (EDID setting) and ISP mini USB port and for easy HDMI port recognition especially useful when Mounting Ears are used for fixation.
Page 9
AC-DA14-AUHD EDID Settings: The 5 DIP switches are located on the side of the device, and each switch has two settings, 0 & 1 (UP=0, DOWN=1). The default mode is “00000” which is all up, in this mode the device copies the EDID from the sink (display) plugged into OUTPUT 1. Custom EDID settings are below.
Page 10
AC-DA14-AUHD When Changing EDIDs, please follow the steps below Start with power off Set DIP to ‘00000’ (all up). Power on the unit Power on the source device and connect the HDMI input port. Note1: EDID Copy mode: EDID will be copied from sink on OUTPUT 1. The AC-DA14-AUHD is set this way by default for maximum “Plug &...
AC-DA14-AUHD Maintenance To ensure reliable operation of this product as well as protecting the safety of any person using or handling this device while powered, please observe the following instructions. • Use the power supplies provided. If an alternate supply is required, check voltage, polarity and that it has sufficient power to supply the device it is connected to.
AC-DA14-AUHD Support Should you experience any problems while using this product, first, refer to the Troubleshooting section of this manual before contacting Technical Support. When calling, the following information should be provided: • Product name and model number • Product serial number •...
AC-DA14-AUHD Troubleshooting Verify Power - Front Panel Pg.8 • Try power-cycling the device while all cables are connected Verify Connections - Front Panel Pg.8 • If the lights are not showing a connection, try Hot Plugging the cable (remove and re-insert while powered up) Possible EDID issue.
Page 15
AC-DA14-AUHD Thank you for choosing AVProEdge! Please contact us with any questions. We are happy to be of service! AVProEdge 2222 E 52nd St N ~ Sioux Falls, SD 57104 1-877-886-5112 ~ 605-274-6055 support@avproedge.com Page 15...
Need help?
Do you have a question about the AC-DA14-AU and is the answer not in the manual?
Questions and answers