If an item was delivered to you in error, please let CPS know and the item will be picked up at CPS’ expense. If your order contains a shortage, report the shortage no later than 24 hours after receiving your shipment.
Page 4
CPS provides technical support to our customers twenty-four hours a day, seven days a week. Trained representatives will be happy to help you with any questions you may have. You can reach the CPS Service Department 24/7 by calling 877.472.8200 or via email at info@go2cps.com.
CPS offers free training to machine operators both upon scheduled requests, as well as through our distributors across the United States. For more information on trainings in your area, visit http://www.go2cps.com or call 877.472.8200.
Page 6
The workplace: • Should be suitable to using a propane grinder, including proper ventilation if using the propane Rover • Should be free of debris and loose objects that could potentially be thrown out by the machine • Should be free of exposed bolts or other implements that could damage the machine or cause injury.
When transporting The CPS Rover on a truck or trailer, after driving the machine onto the trailer or truck, be sure to jack the machine down to where the head is parallel with the floor and secure. Strap the machine down across non-moving parts to ensure safety and stability of the machine during transport.
Page 8
Joystick Panel Control Box (Start/E-Stop) Water Tank Gyro Front LED Lights Kawasaki Engine Weights Swivel Pin System Misting System Chassis Safety Shroud PROPANE ROVER...
The following information is intended to provide you with general instruction on how to properly operate your Rover machine. Be sure to follow all workplace safety regulations and rules when operating the machine. Training in proper techniques and methods is available through CPS and its distributors. To find a training near you and more visit www.go2cps.com...
5. Place the tooling of choice securely onto the plates. 6 .Return the machine to the upright position. 7 .Reconnect Rover Platform/ VacPac Platform by inserting pins securely. If using Rover VacPac Platform, be sure to reconnect VacPac power source before attempting work.
Page 12
5.4 Attaching the Dust Skirt Your Rover machine includes a dust skirt that should be placed on the machine before machine operation. The dust skirt is lined with velcro for easy attachment and removal from the bottom of the safety shroud. 1.
Page 13
OSHA requirements when wet or dry-grinding. On the CPS Rover, locate the black hose, which sits on the platform of The Rover, below the seat. Connect the hose tightly to either a dust interceptor or the hose on the CS Rover VacPac Platform. To attach a dust interceptor or vacuum system for heavier grinding, locate the hose connection on the Rover and connect the vacuum hose securely.
RPM. The Joystick Control To start the Joystick Control, power the controller on by pushing up on the button labeled with the on/off icon. The screen should light up. 6.2 The CPS Rover Control Panel Fig.1 The Rover Control Panel...
Page 15
Fig.2 Joystick Control on CPS Rover. The circled portion is the On/Off button.
6.5 Wet Grinding The CPS Rover is equipped with both a gravity fed water system as well as a misting system. To use the gravity fed system, locate the valve on the side of the water tank. Be sure your machine water tank is full before beginning. Simply turn the valve to begin gravity fed water system.
MAINTENANCE CPS Machines are meant to be low-maintenance for the owner/operator, though there is some important routine maintenance that should be done. See the Maintenance Checklist in the Maintenance Index (located in the back of this manual) for more information.
8.2 Repairs All repairs for CPS Machines must be completed by an authorized CPS service technician. Contact CPS or your retailer to locate certified service centers. Repairs must be completed by trained specialists who have been authorized by CPS to repair our machines.
Upper Belt (From Engine to Center Pulley) for the Propane Rover ACCESSORIES The CPS Rover is ideal for use with the full range of CPS products. Below are some of the accessories popular for use with the Rover. There are several plates by CPS that fit the Rover machines.
Page 20
9.2 Tooling There are many applicable tools for the Rover. From tools perfect for surface prep to polishing resins, CPS has you covered. Visit www.go2cps.com/tooling.html for more. 10.0 MAINTENANCE INDEX In this section, you will find instructions for the most common routine maintenance procedures.