Summary of Contents for AquaDriver SkimClean
- Page 1 Manual AquaDriver SkimClean* *Device for automatic, hydro mechanical Cleaning in skim tubes from proteinskimmers - 1 -...
- Page 2 The socket power unit may only be used with the supplied connecting cable. Misuse may cause health problems or fire. The SkimClean may not be exposed to water or other fluids entirely, but must be kept dry as far as the drive motor is being affected.
- Page 3 After adjusting the mechanic and assembling the complete SkimClean on top of the skim remover pot start testing the function of the self-sucking rotation pump by using the plug power supply unit.
- Page 4 Assure that the pot does not go over the edges or create an additional overflow on the skim pot. During first days of operation we suggest to use the SkimClean in a manual modus. In order to do so you put the plug power supply unit into the socket and observe the cleaning process.
- Page 5 Explanation Position 1: Drive unit 12V DC Position 2: Lid setscrew Position 3: rotation pump Position 4: humidification nozzle /wiper device Position 5: horizontal adjustment device / Wiper Position 6: Wiper with hose and wiper blade Position 7: self sucking silicon hose Position 8: Removable filter - 5 -...
- Page 6 EG-Conformity Declaration according to EG-Machine regulations 98/37/EG Annex II A We declare that the machine described as following goes conform by the listed regulations. Brand: SkimClean (automatic cleaning device for skim tubes of floatation reactors) EG-Regulations: Machine regulations (98/37/EG) Low voltage regulations (73/23/EWG) 32.
Need help?
Do you have a question about the SkimClean and is the answer not in the manual?
Questions and answers