Glasdon EDGEMASTER 20 Installation Instructions

EDGEMASTER 20 INSTALLATION INSTRUCTIONS
For the majority of applications we recommend
installing the Edgemaster by back lling and for
applications where extra stabilty is required we
recommend using the Ground Tube.
However for areas were soil quality is particularly
poor the Edgemaster can be installed using a dry
concrete mix, please see overleaf for instructions.
EQUIPMENT REQUIRED (BACK FILL):
-Spade
-Spirit Level
Please note that diagrams are not to scale
BACK FILL INSTRUCTIONS
310mm
250mm
GROUND LEVEL
Soil
1
Remove any
top dress-
ing (turf
etc) if
required
and dig a
hole to a
depth of
310mm and
a diameter
of approx.
250mm.
3
Back ll the
hole with
soil ensur-
ing the
marker is
vertically
level using
Spirit
a spirit
Level
level.
GROUND LEVEL
GROUND LEVEL
Soil
6
If using an
optional
ground tube
rstly insert
this through
the hole in
the base of
the post as
shown.
2
Tamp the
marker in
place
(remove/
re ll soil as
required to
ensure the
ground level
mark is at
the correct
height).
4
If required
replace the
turf/ bark/ top
dressing as
appropriate.