BASIC FEATURES
Thumb latch. Slide toward rear of unit to unlatch door. Door will latch on closing.
Lock (2 keys provided). Key can be removed in locked or open position.
An additional USB port is provided for your convenience.
Computer input (USB cable included).
Power input (AC cable included).
TO GET GOING
Connect handheld devices (up to 10) to USB ports in VaultPod
Place the handheld in the foam support cradle. A small service loop in the cable is recommended.
Connect AC power to VaultPod
iPods can charge without syncing.
The charge sync process can all take place whether the lid is open or closed.
An LED corresponding to each connected device will glow green, indicating that the device is properly
connected. The LED changes to orange while the device is charging. Once the device reaches full charge, the
LED returns to green color.
One red LED indicates that power is applied whenever the AC power is connected.
Connection to computer for syncing devices is made by connecting a standard USB cable between a USB port
on a computer to the USB port on the VaultPod
A green LED illuminates when a VaultPod10 is connected to the computer.
Multiple VaultPod
each utilizing a separate computer USB hub.
VaultPod
10
using cable supplied.
10
can be connected to a computer,
peg@jinksystems.com
10
User Guide
10
using interface cables (included).
10
.
Jinksystems.com
– 509-263-2622
10/29/11