Advertisement
EN
Error Messages
Symptoms
Reason
Solution
Water supply is not adequate in area.
Water supply taps are not completely
open.
Water supply hose(s) are kinked.
clogged.
If water leakage occurred in the aqua
stop supply hose, indicator
will
become red.
May vary depending on the model.
Load is too small.
Load is out of balance.
The appliance has an imbalance
detection and correction system. If
individual heavy articles are loaded
(e.g. bath mat, bath robe, etc.) this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
Advertisement
