Getting Started - Mackie MP-BTA Owner's Manual

GETTING STARTED

1. Open the USB port on
the MMCX Bluetooth Adapter
and connect the Micro B side
of the included USB cable to
the adapter and the USB-A side
to a charging port. The center
button illuminates solid red to
indicate charging and becomes
solid blue when fully charged.
2. Connect the in-ear monitors
to the Bluetooth adapter
by carefully snapping them
together.
3. Pair the device by pressing
and holding the center
button down on the adapter
while simultaneously
searching for MP-BTA on
the device (phone,
computer, etc.). The button
will rapidly flash red and
blue indicating that it's in
the process of pairing.
Select MP-BTA on the
device to pair them. A voice
command confirms success!