Rain Collector - DAVIS 6464 User Manual

Rain Collector

This rain collector can be used with Vantage Pro2™
weather stations, including Vantage Pro2, Vantage Pro2 Plus,
and the Sensor Transmitter, as well as an EnviroMonitor Node.
The following instructions assume the rain collector is being used with a
Vantage Pro2 or Vantage Pro2 Plus Integrated Sensor Suite. Refer to the user
manual that came with your station for more information.
Manuals are available online at www.davisinstruments.com
Note: Model number 6464 is factory-calibrated to take rain measurements in 0.01 inches. The
metric version of the rain collector, number 6464M, comes factory-calibrated to take
measurements in 0.2 mm.
Components
• Rain collector cone latched onto base
• Base with tipping mechanism and 40' (12 m) cable
• Four #8 x 3/4" screws
• Debris Screen
•16 3.5" (9 cm) bird spikes (optional)
Debris Screen
(locks snugly
inside cone)
40' Cable
Sensor Cable
Exiting Through
(#6464 & 6464M)
Bird Spike
Sockets
RAIN
CONE
Finger Grips
TIPPING
MECHANISM
Bubble Level
Latch
Slot
Opening
Cable Tie
Latch
Drain
Screen
BASE
3.5" (9 cm)
Bird Spikes (16)
4 #8 x 3/4"
Screws
1