Content 1. Interduction 2. Safety Advice 3. Faults and Damage 4. Safety Regulations 5. General Satety Instructions 6. Tecnical Data 7. Function description / Operating Instructions 7.1 Connecting to a PC 7.2 Installing ActiveSync 7.3 Syncronising with your PC 8. Repairs 9. Disposal 10. Cleaning / Maintenance 11. Guarantee and Liability...
1. Interduction The "USB x11" is a data transmission box bet- ween the ecom i.roc and a PC with an USB port for the use outside hazardous areas. 2. Safety Advice These safety instructions contains informations and safety regulations that must be followed to ensure safe and reliable operation of the unit under the described conditions.
- Functionality errors occur. - The permitted limitations are exceeded. 4. Safety Regulations The use of the USB x11 data transmission box meets the requirements of the regulations pro- viding that the user observes and applies the requirements as laid down in the regulations and that improper and incorrect use of the unit is avoided.
To ensure that synchronisation functions correctly, Microsoft ActiveSync 4.2 or higher must be installed on your PC before you connect the i.roc and PC using the "USB x11 data transmission box". How to connect the i.roc Pocket PC to the USB x11 data transmission box: 1. Insert the LG x10 power pack plug into a socket ...
. N O T E : Always connect the "USB x11 data transmission box" with an inserted and powered LG x10 charger before connecting to a PC or the i.roc.
Page 8
N o t e : Microsoft Outlook 98 or higher must be installed on your PC to be able to synchronise emails with your i.roc Pocket PC using Microsoft ActiveSync. If you do not use Outlook, install the Microsoft Outlook 2002 software from the enclosed companion CD.
Pocket PC. 8. Repairs We therefore recommend that such work be per- formed by ecom instruments GmbH, Germany, as all repairs must be examined to ensure functional and safety. 9. Disposal Old electrical equipment and „historic“...
EC Directive 2002/96/EC and the German Electrical and Electronic Equipment law of 16/03/2005. The costs of the transport of the equipment to ecom instruments GmbH are borne by the sender. 10. Cleaning / Maintenance - Only use a suitable cloth or sponge to clean the device.
Page 11
The above-mentioned guarantee conditions are the sole and only right of the purchaser to com- pensation, are exclusively valid and replace all other contract or legal warranty obligations. ecom Instruments GmbH accepts no responsibility for special, direct, indirect, accompanying or con-...
Page 12
The contents of this document, either in part or in their entirety, may not be reproduced, forwarded, distributed or saved in any way without ecom instru- ments GmbH prior written consent. The contents of this document are presented as they currently exist.
Need help?
Do you have a question about the USB x11 and is the answer not in the manual?
Questions and answers