Table of Contents
Advertisement
E90-DTU(Ethernet) wireless transceiver
(2) Open two network debugging assistants, set the network debugging assistant protocol type to UDP Client, the
network debugging assistant's server IP address is set to the module's IP address, the network debugging assistant's server
port is set to the module's local port, click Connect.
(3) Enter a string of data in the sending area of network debugging assistant A, click Send, you will see that network
assistant B has received the same data in the sending area of the serial port. Input a string of data in the sending area of
network debugging assistant A, network assistant B also received the data. It realizes bidirectional transparent transmission.
Chengdu Ebyte Electronic Technology Co., Ltd.
Figure 27 RF Parameter configuration settings
Figure 28 Data transparent transmission
E90 series user manual
21
Hide quick links:
Advertisement
Table of Contents
