Download Print this page

Garvin Adventure Roof Rack Ladder Installation Manual

Jeep wrangler '07-'16 2-door jk

Download this manual

Installation Time: <1 Hour

Tools Required:

 Box Cutter/Knife

 Pliers

 13mm Socket

 Socket Wrench

Installation Instructions:

Note: This product requires a pre-existing Garvin Adventure Roof Rack. This product will not work without it.

1. Carefully open the package using a box cutter or knife (Figure A) and pliers. Ensure the ladder and hardware are

included and undamaged (Figure B).

Garvin Adventure Roof Rack Ladder

Installation Guide for Jeep Wrangler '07-'16 2-Door JK

Figure A

Need help?

Do you have a question about the Roof Rack Ladder and is the answer not in the manual?

Page 1 Installation Instructions: Note: This product requires a pre-existing Garvin Adventure Roof Rack. This product will not work without it. 1. Carefully open the package using a box cutter or knife (Figure A) and pliers. Ensure the ladder and hardware are included and undamaged (Figure B).
Page 2 Figure B 2. Locate the ladder support brackets on the rear passenger portion of the Garvin Adventure Roof Rack (Figure C). Figure C 3. Insert two carriage bolts (supplied) through the top portion of the ladder (Figure D).
Page 3 Figure D 4. Insert the connecting bracket (supplied) to the support bracket closest to the front of the vehicle using a carriage bolt (supplied) and insert the carriage bolts from the top of the ladder into the connecting bracket (front facing) and support bracket (rear facing) (Figure E). Figure E...
Page 4 5. Place a flat-washer and nylon locknut (supplied) on the underside of all three carriage bolts and hand-tighten (Figure F). Figure F 6. Insert two carriage bolts through the lower ladder support bracket and the support bracket on the rear passenger side support bar of the roof rack and hand-tighten (Figure G).
Page 5 Figure H...
Page 6 Before After Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 10/24/2017...