Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Displays2go eMark Pen
- Page 1 Pen User Manual...
- Page 2 DO NOT disassemble the Pen! eMark Pen battery is built-in and cannot be removed. After fully charged, eMark Pen can work at least 7 hours. The tip light will flash to indicate low battery. Plug the Pen to charging base to charge.
- Page 3 eMark Pen charging from 0 to 100 takes up to 1 hour. Pairing Start your PC or white board then check pairing status of the eMark Pen: The tip will light in blue if the Pen paired successfully;...
- Page 4 Pen Restarting If the Pen cannot pair, connect or write, reset the pen with a pin. Insert the pin into the hole at the top and press down to reset as shown below. Set up the shortcut button（Only for Windows 10）...
- Page 5 Pen Changing Color Only certain software supported. Office 2013 and later versions need the add-in to support this functions. Please install the add-in from the included flash drive, or download from the product page at Displasy2go.com. Replacing Tip Spare pen tips are stored inside the charging base.
Need help?
Do you have a question about the eMark Pen and is the answer not in the manual?
Questions and answers