Ergomotion Motiondesk User Manual

Welcome!

Congratulations on your purchase of this motiondesk®-electric height adjustable sit to stand
ergonomic desk. With this desk you can adjust the work surface easily, quickly and effortlessly
to your personal needs and tasks.
The motiondesk has many features which are easy to use. This guide provides guidelines on
using your desk and setting it up for your personal use.
To prevent fire or shock hazard, do not expose the desk to water or moisture.
To avoid electrical shock, do not open the control box. Refer servicing to Ergomotion Pty Ltd.

Main Features: -

•
Push button electric adjustment.
•
Height range from sit to stand
•
Quick, quiet and easy adjustment
•
Memory positions available (optional)

Usage instructions: -

Desk without memory option
Your desk has been supplied with a panel that has an up and down buttons only.
1. Plug the mains power into the mains
2. Turn plug on
3. Operate desk up and down with the up down buttons
4. Initialization may be required. See guideline at the end of this guide

Desk with memory panel (without LCD readout)

Setting memory positions

1. Drive the table to its lowest position to initialise the system if necessary (see below).
2. Adjust table to desired height using the 'Parallel Up" and "Parallel Down" buttons.
3. Press "Store" then "Memory 1"
Memory position "1" is now stored.
4. Repeat steps 1 and 2 for positions "1" and "2".

Recalling memory position.

1. Press "Memory 1" and hold until desk reaches stored position and stops.
Press "Memory 2 or 3" until desk reaches these memory positions and stops.
2.
Memory positioning can be bypassed by pressing "Memory Up" or "Memory Down" until the
correct position is reached.
Motiondesk® Users Guide-Rev B

Warning