Advertisement
Unpacking
1
Carefully unpack unit from its packaging. Properly
inspect for defects before installing. Wear work gloves
to prevent dirt and oil from being transferred to the
luminaire.
Optional Installation: Diffuser
One diffuser
3A
One diffuser: Slide diffuser into base of luminaire.
Electrical Connections
Dimming line
(optional)
1
Loosen cable gland nuts to insert AC line. Optionally, insert
dimming line into smaller cable gland.
2
3B
AC line
2
Remove end cover closest to the cable glands.
Two diffusers
Top: Diffuser with no film
Two diffusers: Slide both diffusers into base of
luminaire, making sure the diffuser with the green
protective film is placed on the bottom with the film
facing towards the outside.
Connect the green wire of the AC line to the middle
position on the terminal block. Connect brown or black
(line) wire to the L1 position and the blue (neutral) wire to
the N position.
Bottom: Diffuser with
green film faces down
(will be removed later)
AC line
Advertisement
