Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● DAP Audio Cable Tester Pro ● User manual Safety Instructions Every person involved with the installation, operation and maintenance of this system has to: ●...
Cable Tester Pro IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. ● Batteries are hazardous waste which need to be disposed properly. If the device has to be disposed, remove the battery first.
Cable Tester Pro Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Cable Tester Pro Description of the device Features The Cable Tester pro is your ideal tool for checking all your audio cables. It is easy in use and rugged enough for use on the road. ● Must have for every roady ●...
25) GND-LED 26) Battery Compartment Installation Remove all packing materials from the Cable Tester Pro. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
Cable Tester Pro Testing a cable At first, turn the rotary switch fully clockwise to test the battery condition. The battery LED will light bright green if the internal battery is fully charged. Then plug one end of the cable into the appropriate jack on the left side panel of the cable tester. Plug the other end of the cable into the appropriate jack on the right side panel.
Cable Tester Pro Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Cable Tester Pro Maintenance The DAP Audio Cable Tester Pro requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
Cable Tester Pro Product Specifications Model: Cable Tester Pro Elektrcal Power 1x standard 9V battery Physical Dimensions: 190 x 112 x 60 mm (LxWxH) incl. connectors Weight: 0,8 kg Design and product specifications are subject to change without prior notice.