Download Print this page

Crommelins FT150RP Operation & Instruction Manual

Fire fighting pump twin impeller

Advertisement

Quick Links

CROMMELINS™ FIRE FIGHTING PUMP
TWIN IMPELLER
OPERATION & INSTRUCTION MANUAL
Thank you for your selection of a Crommelins Fire Fighting Pump
Twin Impeller. This Operation Manual explains its use, installation,
checking and maintenance. We highly recommend that you retain
this manual for ready reference regarding its proper handling.
For spare parts and service, please contact your local
dealer, which you can find here:
www.crommelins.com.au
Sales: 1300 650 659
Head Office: (08) 9350 5588
email@crommelins.com
Customer Service: 1300 554 524
.au

Advertisement

loading
Need help?

Need help?

Do you have a question about the FT150RP and is the answer not in the manual?

Questions and answers

Summary of Contents for Crommelins FT150RP

  • Page 1 CROMMELINS™ FIRE FIGHTING PUMP TWIN IMPELLER OPERATION & INSTRUCTION MANUAL Thank you for your selection of a Crommelins Fire Fighting Pump Twin Impeller. This Operation Manual explains its use, installation, checking and maintenance. We highly recommend that you retain this manual for ready reference regarding its proper handling.
  • Page 2: Table Of Contents

    Thank you very much for purchasing a Crommelins Fire Fighting Pump Twin Impeller which can be used for domestic farming, fire fighting and general pumping purposes. This manual covers its operation and maintenance. Please take a moment to familiarise yourself with the proper operation and maintenance procedures in order to maximise the safe and efficient use of this product.
  • Page 3: Safety And Components

    SAFETY This manual contains important information on how to use the following Crommelins Fire Fighting Pump Twin Impeller models properly and safely: FT150RP, FT150RP7, FT150RP7E, FT150HP, FT150YDE, FT150YDEM, FT220YDE and FT220YDEM. Please read through this manual before you attempt to operate the machine.
  • Page 4: Operating Instructions

    OPERATING INSTRUCTIONS Suction and discharge pipes: To avoid air locks and make priming easy, the suction pipe should be laid so that it rises evenly from the water source to the pump. All pipe joints have to be sealed airtight and they should be the same size or larger than the pump inlet and discharge outlet.
  • Page 5: Type Of Water, Fixed Installation, Storage And Warranty

    You can also visit our website at www.crommelins.com.au to find your local service agent who will be able to assist with all warranty claims.
  • Page 6: Specification Chart

    FIRE FIGHTING PUMP TWIN IMPRELLER SPECIFICATION CHART MODEL FT150RP FT150RP7 FT150RP7E FT150HP Inlet (inch) 1 ½” 1 ½” 1 ½” 1 ½” Outlet (inch) 1 x 1 ½” & 2 x 1” 1 x 1 ½” & 2 x 1”...
  • Page 7 FIRE FIGHTING PUMP TWIN IMPRELLER SPECIFICATION CHART (cont…) MODEL FT150YDE FT150YDEM FT220YDE FT220YDEM Inlet (inch) 1 ½” 1 ½” 1 ½” 1 ½” Outlet (inch) 1 x 1 ½” & 2 x 1” 1 x 1 ½” & 2 x 1” 1 x 1 ½”...
  • Page 8: Trouble Shooting Guide

    TROUBLE SHOOTING GUIDE PROBLEM CAUSE SOLUTION Engine won’t start 1. Engine switch in OFF 1. Turn engine switch to ON position position 2. No fuel in engine 2. Fill fuel tank or turn on fuel supply 3. Worn, fouled or dirty 3.
  • Page 9: Parts Diagram And List

    PARTS DIAGRAM AND LIST Description Description Casing Outer (Ali Alloy) Screw ¼” x ½” Seal Assembly Set Screw 5/16” x 1” Flap Valve Weight Washer, Inside Ratchet 3/8”x17 Flap Valve Rubber Nut, UNF 3/8” Flap Valve Washer Chain Cover, Suction (Inlet 1 ½”) Casing Inner (Aluminium...
  • Page 10: Psa Sheets

    PSA SHEET We have Product Safety Assessment Sheets for all Crommelins Machinery products. If you require one due to work site policies and procedures or for your own reference please go to www.crommelins.com.au to locate your product and download the relevant document.
  • Page 11 NOTES...
  • Page 12 CROMMELINS™ FIRE FIGHTING PUMPS SINGLE IMPELLER OPERATION & INSTRUCTION MANUAL Head Office: (08) 9350 5588 Sales: 1300 650 659 Customer Service: 1300 554 524 email@crommelins.com...