Download Print this page

Aries FilterWorks UNIX-00 Installation Instructions

Modular cartridge holder

Download this manual

160 Cooper Rd

Building 2 Suite A

(856) 768-9600

UNIX

MODULAR CARTRIDGE HOLDER

FOR MODEL:

UNIX-00

Need help?

Do you have a question about the UNIX-00 and is the answer not in the manual?

Page 1 160 Cooper Rd Building 2 Suite A (856) 768-9600 UNIX MODULAR CARTRIDGE HOLDER FOR MODEL: UNIX-00...
Page 2 INTRODUCTION The UNIX cartridge holder is designed to hold a single VP Style cartridge for water purification. The UNIX unit is modular in design to allow the customization or expansion of the UNIX system. Multiple units can be used in series or parallel to achieve varying degrees of water quality and flow rates.
Page 3 COMPONENT SYSTEM LIST UNIX Unit With Inlet and Outlet Push Fittings 6 feet, ¼” OD polyethylene tubing Shut Off Valve Inlet/Outlet Fittings 2 X Mounting Screws M-0212201104 Page 2 of 4 Revision 3...
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS NOTE: TIGHT, LEAK FREE, CONNECTIONS CAN EASLIY BE MADE BY PUSHING THE TUBE FIRMLY IN TO THE FITTING. 1. Mount the UNIX to the wall using heavy-duty anchors rated for a minimum of 25 pounds. 2. Be sure the unit is straight and level. Improper leveling of the unit can cause poor distribution and lead to shortened cartridge life.
Page 5 7. Connect the remaining ¼” Tube to the Outlet Fitting as shown below. UNIX Outlet Assembly 8. Connect the Outlet Fitting into the UNIX Outlet. 9. Install cartridge by placing the bottom of the cartridge on top of the plunger, making sure the o-ring seats firmly into the inside diameter, and push down.