Unblemished Beauty Unblemished Wand User Manual

Hide thumbs

Unblemished Wand

Table of Contents

Need help?

Do you have a question about the Unblemished Wand and is the answer not in the manual?

Questions and answers

Summary of Contents for Unblemished Beauty Unblemished Wand

Page 1 Unblemished Wand...
Page 2 Our Unblemished Wand Important Read - Before first use, carefully read the instruction manual - All cables and accessories must be connected exactly as described in this manual - Do not use in places where the device may come in contact with water - Do not use for longer than 30 minutes at one time - Do not focus on one area for too long. - Always move your wand around your skin to prevent discomfort or burns. - After use always turn off device and unplug the power cord If any of these situations occur, do not use unit: • The power cord is damaged • Spilled into water Use of the device is not suitable for: • Persons suffering from epilepsy, diabetes • Persons with serious kidney or liver disease • Pregnant women • People who are suffering skin diseases • Persons with Heart disease, pacemaker, hypertension Do not attempt to disassemble or repair device, you could get injured and would void the warranty. If the device will have any technical problems, contact our head office.
Page 3 EMS WITH MASSAGE PADS 1. Clean the treatment area 2. Connect one end of the EMS wire to the pads and the other end to the device 3. Remove the protective films from the pads and then stick the pads onto the treatment area. Do not overlap the two pads or use on face 4. Make sure that the EMS intensity level is 0. 5. Turn the device on, and then press EMS button to start the EMS function. 6. Select a proper EMS intensity level on the right side of device body and select your desired massage type on the left side of the device. 7. Reset the EMS intensity level to 0 after use every time. 8. Two pads have to be used together. Maintenance of EMS pads- - Wipe remained dirty things and/or hairs off the pads with wet tissue or rags and put the protective films back onto the pads. If the pads cannot be stuck tightly to the skin after being stored for a long time, wet it with one or two drops of water and it will regain stickiness. Do not pour water onto it or soak it into water. EMS Pads: 15-20 min daily, 2-3 times per week Illustration of how to place EMS Pads on different body parts Shoulders Arms Hips Thighs Abdomen...
Page 4 EMS WITH MASSAGE GLOVES 1. Clean your face or treatment area of your body 2. Connect one end of the EMS wire to the gloves, and the other end to the device 3. Put on the gloves, with the wire connected end upwards 4. Make sure the EMS intensity is at level 0 5. Turn on the device, and then press EMS button to start ems function 6. Select a proper EMS intensity level on the right side of device body and select your desired massage type on the left side of the device. When treated on the face for skin firming and lifting, the recommended intensity level is 1-2 7. Reset the ems intensity level to 0 every time after use 8. Two gloves have to be used together at the same time. EMS Gloves for body: 15-20 min daily, 2-3 times per week EMS Gloves for facial care: 5 min daily, 2-3 times per week Illustration of how to place EMS Glove on different body parts Face Abdomen Arms Legs & Buttocks Breasts...
Page 5 ULTRASONIC SLIMMING 1. Clean the treatment area of your body 2. Apply your body care gel/lotion evenly onto the skin as well as the ultrasonic steel head 3. Turn on the device, select ‘ion –‘ plus ‘sonic’ function, choose and intensity level (low, medium, high) depending on your preference, the select red LED and start to massage. Ultrasonic for body: 10-30 min daily, 2-3 times per week Illustration of how to move the application head on individual body parts Décolleté Arms Breasts Abdomen & Hips Legs Buttocks...
Page 6 FACIAL CARE For Deep Cleansing- 1. Remove makeup and clean the skin 2. Apply your facial cleanser evenly onto the skin as well as the ultrasonic steel head 3. Turn on the devices, select ‘ion+’ function, choose an intensity level to suite your preference and start to massage. Recommended intensity for facial care is level 1-2 3 min daily, 2-3 times per week Improvement of Skin tone/Regaining Skin Vitality/Nutrition Conducting- 1. Remove makeup and clean skin 2. Apply your skin care gel/lotion evenly onto the skin as well as the ultrasonic steel head 3. Turn on the device, select ‘ion-‘ plus ‘sonic’ function and choose your desired intensity. Recommended intensity for facial care is level 1-2 5 min daily, 2-3 times per week For Line and Wrinkle Repair/ Skin Lifting and Facial Fat Reduction- 1. Remove makeup and clean skin 2. Apply your skin care gel/lotion evenly onto the skin as well as the ultrasonic steel head 3. Turn on the device, select ‘sonic’ function, choose and intensity level, select Red LED and start to massage. Recommended intensity for facial care is level 1-2 10 min daily, 2-3 times per week For Acne Relief and Blemish Removing- 1. Remove makeup and clean skin 2. Apply your skin care gel/lotion evenly onto the skin as well as the ultrasonic steel head 3. Turn on the device, select ‘sonic’ function, choose and intensity level, then select Blue LED and start to massage. Recommended intensity for facial care is level 1-2 10 min daily, 2-3 times per week For Sensitive Skin- 1. Remove makeup and clean skin 2.
Page 7 We recommend massaging upwards following illustrations bellow for your desired areas. 1.Push the device slowly 2.Push the device slowly 3.Push the device slowly upwards along the curve upwards along the curve upwards from mouth of chin to behind the of the chin to front of corners to the temples ears the ears 4.Push the device slowly...