Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ootori RM503
Summary of Contents for Ootori RM503
- Page 1 MASSAGE CHAIR USER MANUAL MODEL: OOTORI RM503...
-
Page 2: Table Of Contents
Do not use the unit against bare skin. While thin clothing may increase e ectiveness, Thanks for choosing OOTORI massage chair. This operating manual exposing the skin directly to the massager may irritate the skin. Do not use the unit while contains important information about how to use the chair safely and wearing anything hard on your head like a hair accessory, etc. -
Page 3: Grounding Instructions
If the massager functions abnormally, immediately turn o the power and have the Do not use the unit on top of heating appliances, such as electric carpets, etc. Do not massager checked by an authorized service center. operate the unit under blanket or pillow. Excessive heating can occur and cause fire, Make sure there are no obstacles behind the chair before reclining it. -
Page 4: Assembly
Place the backrest over the main unit. Securely lock the flat head bolts (A and C) into WARNING both sides (B and D) of the main unit. With the backrest reclined backward, the footrest goes up. To avoid collision with any surrounding objects, a clearance of at least 11.81”... - Page 5 Connect the wires on bottom of chair: Connect the jack cable from main unit (A) Firmly insert the air plug of main unit A into the air pipe of shoulder unit B. Insert with the female cable from backrest (B), firmly insert the air plug of main unit into the side panels along the hook C to the holder D.
-
Page 6: Names And Parts
NAMES AND FUNCTIONS OF PARTS Place the seat onto the seat and attached it with Velcro tapes, and connect Connect the cabel and air plugs of seat with seat cushion. MAIN UNIT 1.Pillow 2.Backpad 3.Forearm Units 4.Heater 5.Seat 6.Seat Vibrator 7.Footrest Insert the power plug and the data line of the controller into their outlet. -
Page 7: Remote Controller
REMOTE CONTROLLER 3.CHECK THE CONDITION OF THE MASSAGE CHAIR. Hold up the back pad and check for any tear in the backrest cloth as well as in any 1.TFT Display other parts. 2.Power Button 3.Auto Should there be any tear, no matter how small it is, stop using the unit immediately, 4.Kneading ON/OFF Button unplug the power cord and have the unit repaired. -
Page 8: Specifications
TROUBLESHOOTING Shiatsu Mode Press the button to turn on or turn o reverse back rollers direction Speed Press the button to adjust the speed of rollers in chosen area PROBLEM SOLUTION The rollers and the backrest This is the sound produced by mechanical Heating Press the button to turn on or turn o heater pad make frictional sound.
Need help?
Do you have a question about the RM503 and is the answer not in the manual?
Questions and answers
My remote won’t work
If the Ootori RM503 remote does not work, follow these troubleshooting steps:
1. Check if the power button was pressed accidentally.
2. Ensure the power plug is properly plugged into the socket.
3. If the chair stopped due to overheating, turn off the main power switch and wait at least 30 minutes before restarting.
4. Confirm that the power supply is 120V AC as specified.
5. Inspect the power cord and plug for any damage; if damaged, return the unit to an authorized service center.
This answer is automatically generated
I need a replacement controller