Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Creative Crossover M
Summary of Contents for Creative Crossover M
- Page 1 Crossover M Installation Version 3.1...
-
Page 2: Box Contents
❏ Main profile Locking pin (medium) Locking pin (small) Securing ring Strap 4m, ø90 mm - 243 cm ø90 mm profile ø70 mm profile Crossover M Crossover M Building instructions Building instructions 2 | 24 3 | 24 www.creative-products.nl www.creative-products.nl... - Page 3 CS-0050 CS-0050 CS-0389 Upper main profile CS-0389 X-connector CS-0050 X-connector Hooks have to CS-0050 point inwards Upper main profile CS-0389 Upper main profile CS-0389 Crossover M Crossover M Building instructions Building instructions 4 | 24 5 | 24 www.creative-products.nl www.creative-products.nl...
- Page 4 (short version) and securing rings Sub frame center CS-0334 Sub frame beam CS-0356 Sub frame connector CS-0336 Joint has to point downwards Securing ring Locking strip CS-0248 CS-0337 Crossover M Crossover M Building instructions Building instructions 6 | 24 7 | 24 www.creative-products.nl www.creative-products.nl...
- Page 5 X-connectors Note: this lifting methode requires more height for building Use the 2 inner eyes of the X-connectors Tension cable 2x per X-connector CS-0245 Crossover M Crossover M Building instructions Building instructions 8 | 24 9 | 24 www.creative-products.nl www.creative-products.nl...
- Page 6 CS-0114 T-Connector Left Sub profile Marked with “L” CS-0113 CS-0116 T-Connector Right Marked with “R” CS-0117 Securing ring CS-0248 Locking pin Short version CS-0105 Crossover M Crossover M Building instructions Building instructions 10 | 24 11 | 24 www.creative-products.nl www.creative-products.nl...
- Page 7 Secure all parts with locking pins (long version) and securing rings (long version) and securing rings Curvature sub profiles has to point inwards Main profile CS-0114 Crossover M Crossover M Building instructions Building instructions 12 | 24 13 | 24 www.creative-products.nl...
- Page 8 The positioning cables are used to secure an acurate distance between the feet. After mounting the positioning cables the structure can be placed on its feet Pull the legs of the structure outwards to put the positioning cables under tension Crossover M Crossover M Building instructions...
- Page 9 After anchoring, the positioning cables can be removed. In stormy conditions the positioning cables have to be mounted to provide extra stability to the structure Crossover M Crossover M Building instructions Building instructions 16 | 24 17 | 24 www.creative-products.nl...
- Page 10 STEP 14 Place the pull bars in the loops of the cover corners Guide the cover on both sides Pull bar CS-0489 Crossover M Crossover M Building instructions Building instructions 18 | 24 19 | 24 www.creative-products.nl...
- Page 11 Use the seams of the cover to align the cover with the structure Ratchet plate CS-0236 Turn buckle CS-0490 Use the outer hooks of the feet Crossover M Crossover M Building instructions Building instructions 20 | 24 21 | 24 www.creative-products.nl...
- Page 12 STEP 18 Mount the connection gutter (if desired) Close the zippers from right to left, seen from the inside of the structure Connection gutter CS-0279 Crossover M Crossover M Building instructions Building instructions 22 | 24 23 | 24 www.creative-products.nl...
- Page 13 Installation movie Installation movie Installation movie Lounger M Crossover M Hexadome M Installation movie Installation movie Installation movie Lounger L Crossover L Hexadome L CS BI COM V3.1 Gewenten 43a 4704 RE Roosendaal The Netherlands info@creative-products.nl T +31 (0)165 51 07 77...
Need help?
Do you have a question about the Crossover M and is the answer not in the manual?
Questions and answers