Westinghouse WES41-680 Instruction Manual page 4

Leg and foot massager installation
Step 1) Place the leg and foot massager close to the front of the massage chair. Connect the air tube of
the chair into the leg and foot massager. Connect the square power cords together. Make sure they are
secured and tight.
IMPORTANT: Avoid bending the air tube.
Step 2) Unscrew the locking pin from the massage chair.
Step 3) Insert the locking pin of the foot massager all the way into the flat washer then into the foot
massager holding support and then through the foot massager washer.
Step 4) Make sure it is inserted all the way in as per picture.