Download
Share
Print this page
  1. Manuals
  2. Brands
  3. DCSENG Manuals
  4. Power Tool
  5. S-Cutter S-EM Series
  6. Manual

DCSENG S-Cutter S-EM Series Manual

Hide thumbs

Advertisement

Quick Links

PIPE(TUBE) CUTTER Of Best Technology
Manual
(
EM0.5 /
EM1.0 )
SAFETY PRECAUTIONS
Thanks for choosing the S-Cutter.
Make sure that you carefully read and fully understand the Manual to use the device correctly
and keep yourself and your properties safe.

Advertisement

loading
Need help?

Need help?

Do you have a question about the S-Cutter S-EM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for DCSENG S-Cutter S-EM Series

  • Page 1 PIPE(TUBE) CUTTER Of Best Technology Manual EM0.5 / EM1.0 ) SAFETY PRECAUTIONS Thanks for choosing the S-Cutter. Make sure that you carefully read and fully understand the Manual to use the device correctly and keep yourself and your properties safe.

  • Page 2: Table Of Contents

    PIPE(TUBE) CUTTER Of Best Technology CONTENTS 1. SAFETY PRECAUTIONS 2. Must-Follow Rules 3. Instructions Before Use 4. How to Use ● S-EM0.5 ● S-EM1.0 5. Quality Warranty...

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS * In this Manual, ‘Power Tool’ refers to both corded power tools and cordless battery-powered tools. Keep the workplace clean and well-lit at all times. An untidy or dark workplace may result in an accident. Always be vigilant and stay aware of your surroundings. Avoid an unstable stance and stay poised always before operation.
  • Page 4 PIPE(TUBE) CUTTER Of Best Technology Check if the battery is damaged. If the battery is damaged or incorrectly used, vapor can form. Ventilate the workplace as this can irritate respiratory passages. Use the battery with Bosch power tools. The use of genuine products can protect the battery from overload. Keep the battery safe from sharp objects or external shock.
  • Page 5 Remove from power source. In the case that the tool is left unused for a long period of time, unplug the power cable and remove the battery. Remove power at replacement of parts or when the tool is inspected or left unused. Be careful not to operate the tool by accident.

  • Page 6: Must-Follow Rules

    PIPE(TUBE) CUTTER Of Best Technology Must-Follow Rules The instructions in this user manual contains information that is important to the safe use of this product. Not following these instructions can cause death, serious injury, and massive property damage. For safety, the instructions are divided into ‘WARNING’ and ‘CAUTION’ depending on degree of risk, and the details are as follows: Symbol Description...
  • Page 7 WARNING ● Do NOT pour cutting fluid or water. The penetration of water or other liquids into an electric motor may result in electric shock or death. ● Do NOT work outdoors on a rainy or humid day. An electric shock may result in serious bodily injury or death. ●...
  • Page 8 PIPE(TUBE) CUTTER Of Best Technology Instruction Before Use 1. Check the electric leakage breaker Make sure the system is powered on the circuit breaker is installed. Check if an electric leakage breaker (ELB) with rated capacity is installed in all electric units.
  • Page 9 EM0.5 Hight-quality, Ultra-light Squaring Facing Machine! Essential tool in UHP tube construction Very durable, high-strength insert tip(4sides used) Capacity: 1/4 – 1/2inch S-Cutter...

  • Page 10: Instructions Before Use

    PIPE(TUBE) CUTTER Of Best Technology How to Use S-EM0.5 How to Use S-EM0.5 Instructions before Use Fully understand how to use the tool as instructed by the Company or distributor. If you did not receive the required training, ask for training from those who already completed the training.
  • Page 11 1. Name of the parts and controls Component Description Motor(BOSCH) Driving Unit  Speed setting switch Speed setting(  gear recommended) Battery Motor battery Power and speed ON/OFF, speed adjustment control switch Changes direction to forward / reverse Forward/reverse switch (default setting: Forward) Collet clamping bolt Clamps tube attached to the collet...
  • Page 12 PIPE(TUBE) CUTTER Of Best Technology 2. Accessories ● Standard Accessories Charger: AL1130CV 10.8V Battery: GBA 10.8V 2.0Ah Collet: 1/4, 3/8, 1/2inch(6.35, 9.53, 12.7mm) T-wrench: T15-133mm(L) T-hex wrench: 3mm-133mm(L) ● Optional Accessories Insert Tip: Tip box included, 10EA/BOX Collet: 1/8inch (3.18mm) www.s-cutter.co.kr...
  • Page 13 3. How to use S-EM0.5 3-1. Mounting of the insert tip ① ② ① Unscrew the tip holder bolt (a) using a T-hex wrench. * CAUTION: Remove the battery prior to this task. ② Pull off the insert tip holder (b) and hold it to the clamping hole (e) using a T-hex wrench (f).
  • Page 14 PIPE(TUBE) CUTTER Of Best Technology 3-2. Processing methods and procedures (1) Collet and tube assembly ① ② ③ ① Select a proper size collet for the tube (d) and slightly tilt and insert the collet (b) into the collet-locating pin (c) from the bottom. ②...
  • Page 15 (2) Tube-processing volume control Forward Forward Backward Backward ① ② ③ Press the power switch (d) and allow the insert tip holder (b) to rotate in ① the direction of the arrow. (Reverse processing NOT permitted, the default setting for the forward/reverse switch (f): fixed) ②...
  • Page 16 PIPE(TUBE) CUTTER Of Best Technology (3) Tube processing ① ② Insert the tube (a) into the collet and fix it (make sure that it does not ① touch the insert tip). ② Press the power switch (d) slowly and start processing, using the processing-control handle.
  • Page 17 4. Product specifications ● Machine specifications 1/4, 3/8, 1/2inch Processing Type Tube (6.35, 9.53, 12.7mm) Capacity *Able to manufacture non-standard collets Processing Slide-bar scale is 0.05mm Volume Control Weight 1.25Kg(battery included) Output 10.8V, 2Ah Machine Specifications Speed 0 – 400RPM Size Hard case(470*320*140) ∙...
  • Page 18 PIPE(TUBE) CUTTER Of Best Technology EM1.0 Hight-quality, Ultra-light Squaring Facing Machine! Essential tool in UHP tube construction Very durable, high-strength insert tip(4sides used) Capacity: 1/4 – 1inch www.s-cutter.co.kr...
  • Page 19 How to Use S-EM1.0 How to Use S-EM1.0 Instructions Before Use Fully understand how to use the tool as instructed by the Company or distributor. If you did not receive the required training, ask for training from those who already completed the training. Make sure that the battery is removed before replacing the insert tip.
  • Page 20 PIPE(TUBE) CUTTER Of Best Technology 1. Name of the parts and controls Component Description Motor(BOSCH) Driving Unit   Speed setting switch Speed setting(  gear recommended) Battery Motor battery Power and speed ON/OFF, speed adjustment control switch Changes direction to forward / reverse Forward/reverse switch (default setting: Forward) Collet clamping bolt...
  • Page 21 2. Accessories ● Standard accessories Charger: AL 1860 CV Battery: GBA 18V 5.0Ah Collet: 1/4, 3/8, 1/2, 3/4, 1inch(6.35, 9.53, 12.7, 19.05, 25.4mm) T-wrench: T15-133mm(L) T-hex wrench: 3mm-133mm(L) ● Optional accessories Insert Tip: Tip box included, 10EA/BOX Collet: 1/8inch (3.18mm, 15.88mm) 8A, 10A, 15A, 20A (13.8, 17.3, 21.7, 27.2mm) S-Cutter...
  • Page 22 PIPE(TUBE) CUTTER Of Best Technology 3. How to use S-EM1.0 3-1. Mounting of the insert tip ① ② ① Unscrew the tip holder bolt (a) using a T-hex wrench. * CAUTION: Remove the battery prior to this work. ② Pull off the insert tip holder (b) and hold it to the clamping hole (e) using the T-hex wrench (f).
  • Page 23 3-2. Processing methods and procedures (1) Collet and tube assembly ① ② ③ ① Select a proper size collet for the tube (d) and slightly tilt and insert the collet (b) into the collet-locating pin (c) from the bottom. ② Turn the collet fastener (a) in the direction of the arrow to prevent the collet (b) from falling off and plug it into the groove in the upper collet.
  • Page 24 PIPE(TUBE) CUTTER Of Best Technology (2) Tube-processing volume control ① ② ③ ① Turn on the power switch (d) and allow the insert tip holder (b) to rotate in the direction of the arrow. (Reverse processing NOT permitted, the default setting for the forward/reverse switch (f): fixed) ②...
  • Page 25 (3) Processing procedures (tube processing) ① ② Insert the tube (a) into the collet and fix it (make sure that it does not ① touch the insert tip). ② Press the power switch (d) slowly and start processing, using the processing-control handle.

  • Page 26: Machine Specifications

    PIPE(TUBE) CUTTER Of Best Technology 4. Product specifications ● Machine specifications 1/4, 3/8, 1/2, 3/4, 1inch Processing Type Tube (6.35, 9.53, 12.7, 19.05, 25.4mm) Capacity * Able to manufacture non-standard collet Processing Scale on the processing control handle is 0.05mm Volume Control Weight 2.3Kg(battery included)

  • Page 27: Maintenance And Inspection

    5. Maintenance and inspection ● Make sure that the power cord is unplugged, or battery is removed before repair or maintenance. Regularly check for loose screws. ⦁ Fasten any loose screws tightly. ⦁ It is very dangerous to use the tool with loose screws. Do NOT keep the tool in a wet place(risk of a short circuit).

  • Page 28: S-Em0.5

    □ S-EM0.5 □ S-EM1.0...
  • Page 29 PIPE(TUBE) CUTTER Of Best Technology DCSENG CO., LTD. 23-22, Jukjeon-3gil, Hyeondo-myeon, Seowon-gu, Cheongju-si, Chungcheongbuk-do, 28214, Republic of Korea T. +82-43-256-0945 F. +82-43-256-0946 W. www.dcseng.co.kr www.s-cutter.co.kr...

This manual is also suitable for:

S-cutter s-em1.0S-cutter s-em0.5