Advertisement
CLEANING & DISASSEMBLY
1. Completely remove the Thickness Adjustment Knob and the Locking Wing Nut from the
Adjustment Screw by turning counter-clockwise.
2. Hold on to the top of the Hamburger Press and turning counter-clockwise, unscrew the
Adjustment Plate and Adjustment Screw from the Hamburger Press.
3. Clean all parts in warm soapy water, then thoroughly dry.
ASSEMBLY
1. By holding on to the top of the Hamburger Press, screw the Adjustment Plate and Adjustment
Screw into the top of Hamburger Press by turning clockwise until approximately half the threads
are showing on top of the Hamburger Press.
2. Re-thread the Locking Wing Nut onto the Adjustment Screw. Pay special attention not to
cross-thread any parts when assembling.
3. Screw the Thickness Adjustment Knob clockwise onto Adjustment Screw until finger tight.
ATTENTION!
If any components of this unit are broken, do not operate properly, or for product returns, please
contact Weston Products LLC
Phone: 1-800-814-4895 (Outside the U.S. 440-638-3131)
20365 Progress Drive, Strongsville, Ohio 44149
WestonProducts.com
All Trademarks and Registered Trademarks are property of the respective companies.
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
SINGLE
HAMBURGER
PRESS
INSTRUCTIONS
MODEL #07-0301
PATENTED
CAUTION! It is important to follow the "Food Safety" guidelines. For the most
up to date instruction visit the USDA website.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Weston 07-0301
Summary of Contents for Weston 07-0301
- Page 1 ASSEMBLY PRESS 1. By holding on to the top of the Hamburger Press, screw the Adjustment Plate and Adjustment Screw into the top of Hamburger Press by turning clockwise until approximately half the threads are showing on top of the Hamburger Press. INSTRUCTIONS 2. Re-thread the Locking Wing Nut onto the Adjustment Screw. Pay special attention not to cross-thread any parts when assembling. MODEL #07-0301 3. Screw the Thickness Adjustment Knob clockwise onto Adjustment Screw until finger tight. ATTENTION! If any components of this unit are broken, do not operate properly, or for product returns, please contact Weston Products LLC Phone: 1-800-814-4895 (Outside the U.S. 440-638-3131) 20365 Progress Drive, Strongsville, Ohio 44149 WestonProducts.com All Trademarks and Registered Trademarks are property of the respective companies.
- Page 2 Weston Products LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the company, it has been proven to be defective as to seller’s labor and material, within the warranty period. New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of Base purchase. Replacement parts are warranted for the remainder of the original warranty period. Plate For non-warranty repairs, contact Weston Products LLC’s Customer Service at 1-800-814-4895 M-F 8am-5pm EST (outside of the United States 440-638-3131) to obtain a Return Merchandise Authorization Number (RMA Number). Weston Products LLC will refuse all returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION FROM WESTON PRODUCTS LLC. If any components of this unit are broken or the unit does not operate LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is properly, call Weston Products LLC Toll Free at 1-800-814-4895 designed. The product must not have been previously altered, repaired, or serviced by anyone else other...
Need help?
Do you have a question about the 07-0301 and is the answer not in the manual?
Questions and answers