Troubleshooting Methods - Palona QUUBI User Manual

Preset : Last listened or 1-5(Spotify:0-4)
Volume : 0 – 32.
To save these settings and set the alarm, scroll down and select Save.
The Now Playing, screen shows active set
alarms with an icon at the bottom left.
The Standby screen shows active set
alarms with an icon and the alarm time
To cancel a sounding alarm,
Standby or Alarm .
7.2 Sleep
To set the sleep timer, press the Sleep key repeatedly to cycle through
the sleep time options:Sleep OFF, 15 MINS, 30 MINS, 45 MINS or 60
MINS.
On the Now Playing screens the remaining sleep time is displayed at
the bottom of the screen.
Note： All modes， if there is no signal input, the product will enter
the standby after 15 minutes

8. Troubleshooting Methods

The following table contains common problems and solutions, please
read carefully.
Problem
The speaker has
no sound
The
speaker murmur
No power
Try to increase the volume;
Please reselect the audio input channel;
Please make sure that all cables are correctly connected;
Please make sure that all cables are correctly connected;
Please replace the other audio cable;
Please ensure
output itself did not murmur;
Please make sure that the adapter and the host is connected
correctly;
Please check the power adapter voltage and current demand;
press
Solution
the equipment that
- 24 -
connected audio cable