Applica Water Products Clear2GO CWB200 Quick Start Manual

www.clear2o.com
Customer Service: 1-866-667-0266
USING YOUR
1. Twist lid counterclockwise to unscrew
and remove.
2. Fill bottle with water from any tap or
drinking fountain.
3. Replace lid, screwing clockwise to
tighten firmly.
4. Open the spout, tilt the bottle and
squeeze gently to get a past flow
of clean, filtered water.
Note: For best results, change water in the
water bottle with filter daily.
REMOVING / REPLACING YOUR
1. Remove lid from bottle.
2. Grasping the filter with one hand and the lid
with the other, unscrew the filter from the lid.
3. To replace, simply dispose of the old filter and
screw a new filter in place.
4. Fill bottle and replace lid; squeeze first bottle
of water into a sink to rinse the filter and your
water bottle with filter is ready again!

CLEANING

1. Remove lid from bottle.
2. Remove filter from lid .
3. The lid and bottle can be washed by hand in
warm soapy water and rinsed, or they maybe
washed in the top track of your dishwasher.
Important: Do not wash the
Never place filter in the dishwasher.
Water Bottle with Filter
WATER BOTTLE WITH FILTER
FILTER
filter.
BEFORE FIRST USE
Remove all the packing material and any
stickers from product.
Remove and save this instruction sheet.
Remove filter as instructed below and
wash bottle and cap with mild soap and
any dust or residue left from manufacturing.
Do not wash filter.
Fill bottle with water, replace the filter in the
lid as instructed below and squeeze full bottle
of water into a sink; this will clean any dust or
residue left in the filter from manufacturing.
WARNING : DO NOT PLACE FILTER IN DISHWASHER
Important: Always inspect the purge valve for obstructions or a
deformed seal after cleaning, before reassembling the bottle
and using again.

OPERATING REQUIREMENTS

Water Temperature: Max 85 F - Min 34 F For cold water use only.
It is essential to follow the operational,
maintenance and filter replacement instructions
for this product to perform as advertised.
For best results, replace filter every 2 -3 months .
Do not microwave the bottle.
Do not immerse or fill the bottle with boiling bottle.
Do not place the bottle in the freezer or allow it to
be kept in freezing temperature.
For best results, change water in the
water bottle with filter daily.
To purchase replacement filters, or for information on other
products, please visit www.clear2o.com
1.Pull up Spout
2.Purge Valve
3.Lid
4.Filter (Model Number CWF202)
5.Bottle
Indicates consumer replaceable parts.
Model
CWB200