Table of Contents
Advertisement
Quick Links
Equipment modernization package
APPLICATION
The HS-200 PT RO Processor is specifically designed to
supply treated water for point-of-use electric steam
generators to significantly reduce or eliminate boiler
scaling and to extend peak equipment performance.
This unit is intended for use with a single
sterilizer/electric boiler combination – with boilers in the
range of 12 to 30 KW.
FEATURES
•
Universal mounting system for quick, easy
installation.
•
Attractive Stainless Steel Cabinet.
•
Small size (24"x16"x20") permits installation
virtually anywhere.
BENEFITS
•
Requires service connection to cold / hot water
supply and drain. No electrical requirement.
•
Extended life from boiler heating element.
•
Increased reliability – fewer equipment breakdowns
due to boiler scaling.
•
Convenient quarterly maintenance intervals with
economical PM packages available.
SPECIFICATIONS
•
Provides 5-50 TDS output water from potable
water sources up to 2000 TDS, 250 ppm or 14
grains hardness.
PM package (available separately)
Includes a year's supply of consumable
components.
Watts Modernization Package
HS-200 PT
Reverse Osmosis Processor
Getinge Part #61301605522
MATERIALS AND SERVICES SUPPLIED
Self contained RO Processor including filters,
housings,
pressure
permeate pumps in a stainless steel cabinet.
Includes connection to equipment.
WARRANTY
Watts HS-200 PT systems are warranted for one
year. Labor for repairs is provided for 90 days
following installation and start-up. Warranty repairs
will be performed Monday through Friday, 8am to
5pm, excluding weekends and Holidays.
tank,
bypass
valve
and
Advertisement
Table of Contents
Summary of Contents for Watts HS-200 PT
-
Page 1: Specifications
Reverse Osmosis Processor Getinge Part #61301605522 Equipment modernization package APPLICATION The HS-200 PT RO Processor is specifically designed to supply treated water for point-of-use electric steam generators to significantly reduce or eliminate boiler scaling and to extend peak equipment performance. -
Page 2: Installation Instructions
HS-200 PT Installation Instructions Refer to drawing A2 in this brochure for mounting instructions, minimum service clearances and service connections. Utility Requirements: Note: A floor drain within 10 feet of the Boiler Mate is required. ½” potable cold water supply – 2gpm, 45-110 degrees F, 50 – 90 psig... - Page 3 9.50 RIGHT SIDE AIR VALVE ACCESS PANEL C TANK NEEDS TO BE EMPTY WHEN CHARGING TO THE REQUIRED 15 P.S.I. SOURCE OF SUPPLY: PROCESSOR P/N 570200 16.07 MFG: Watts Pure Water 14.00 Phoenix, AZ USA DRAWN Craig Schmitt 7/8/2003 Watts Premier...
- Page 4 Equipment Outlet Threaded rods attached to ceiling (Product Water) 16” Drain Outlet Tapwater Inlet Threaded Rod Panel Cover 20-1/4” Air Tank Access Rods run through cabinet @ all four 18” corners. 12” 24” ACCESS ACCESS Flat Washer AREA AREA Nylon Lock Nut Nylon lock nuts &...
- Page 5 GREEN TUBING TAPWATER INLET EQUIPMENT OUTLET DRAIN OUTLET BLACK TUBING BLACK > BLACK > PERM PERM BRINE BRINE PERM PERM BRINE BRINE PERM PERM PERM BRINE BRINE PART NUMBER ITEM ITEM DESCRIPTION 5 MICRON SEDIMENT FILTER 107021 GAC/KDF 107024 10 MICRON CARBON BLOCK 101011 MEMBRANE TFM 100 GPD 210000...
- Page 6 Model HS-200 Boiler Mate # 570200 Replacement Parts Item # Item Description Qty per unit 61301605453 Permeate Pump 61301605455 Membrane Filter 61301605473 Flow Restrictor 750 ml 61301605471 5 Gal Storage tank 61301605449 Filter Sediment 5 micron 61301605447 Filter Carbon Block 5 micron 61301605450 Filter GAC/KDF 61301605516...
- Page 7 570200 HS-200 PT BOM A BOX-FILTERPAK PACK CARDBOARD SHEET WHT15.5 X 9.625 32 ECT GETIN 4.0000 EA A BOX-HS333 PACK BOX 28X28X26 FORHS-333 1.0000 EA A BOX-HS333-PLY PACK HS333 PLYWOOD INSERT 1.0000 EA A FOAM-HS333 PACK FOAM CORNER PADS FORHS333 UNIT 8.0000 EA...
- Page 8 F299611 LABEL-FILTER-GET-CB-BLACK-#3 4.0000 EA F299620 LABEL-FILTER-GET-TDS/PH-BL-#5 4.0000 EA F299621 LABEL-FILTER-GET-SED-RED 4.0000 EA F299624 LABEL-FILTER-GET-KDF-6LB-GLD#2 4.0000 EA F307020 PH/TDS BALANCER-Q SERIES-6" 4.0000 EA F334001 FTG BALL VALVE BRASS 1/2"FXF 1.0000 EA FMPE-14-L-500 TUB FLOWMATIC 1/4" P.E. TUBING BLUE 500FT 0.0010 ROLL I35216P-6 PLB NIPPLE HEX BRASS .375"...
- Page 9 HS-200 Quarterly PM Maintenance Procedure: Remove Front Panel Figure 1 Remove 3 prefilters Figure 2 Remove Calcite feeder Figure 3 1. Remove eight screws from front panel (figure 1). Remove front panel, 2. Unscrew first stage sediment filter by grasping and turning counter clockwise (Figure 2) (No need to turn off incoming water source) discard, unscrew remaining filters and discard.
- Page 10 To by pass the RO system, open top panel by removing eight screws (figure 7)and open ½” brass “Watts” ball valve (figure 8) for tap water by-pass. After service has been achieved close the “Watts” ball valve and wait for the system to begin permeating.