Environmental Protection; Faq/Troubleshooting - ALDI WORKZONE 10366 User Manual

45W Staple / Nail Gun

Environmental protection

Recycle unwanted materials instead of disposing of them as
waste. All tools, hoses and packaging should be sorted, taken to
the local recycling centre and disposed of in an environmentally safe way.

FAQ/Troubleshooting

Fault
1. Product
does not start
2. Product
does not
reach full
power
3. Nails (10) /
staples (9) jam
in tool
For further inquiries or issues associated with your tool, call our
Customer Service Hotline on 1300 889 028 or email us at
info.aldi@positecgroup.com
AFTER SALES SUPPORT
1300 889 028
AUS
(toll free)
Cause
1.1 Not connected to power
supply
1.2 Product not switched
on.
1.3 Power cord or plug is
defective
1.4 Other electrical defect
to the product
2.1 Extension cord not
suitable for operation with
the product
2.2 Power source has too
low voltage
3.1 Wrong size nails(10) /
staples (9)
3.2 Driver channel worn
3.3 Bent nails (10) / staples
(9)
3.4 Loose magazine/nose
screws
3.5 Broken/chipped driver
FAQ / Troubleshooting
Remedy
1.1 Connect to power
supply
1.2 Press down the "I"
on thee on/off switch
(6).
1.3 Contact customer
service
1.4 Contact customer
service
2.1 Use a proper
extension cord
2.2 Connect to another
power source
3.1 Use only
recommended nails (10)
/ staples (9) sizes
3.2 Replace nail / staple
3.3 Discontinue using
these nails (10) / staples
(9)
3.4 Tighten all screws
3.5 Replace nail / staple
e-mail: info.aldi@positecgroup.com
MODEL No.: PCT161 • 07/2019 10366
AUS
15