LiquidRed LR3200 Series Mounting Instructions

LR3200 Series - Mounting Instructions
CAUTION
The wall fasteners provided with the installation kit are
for convenience purpose only and are not suitable for
all types of installations. It is the ultimate responsibility
of the installer to ensure that the product is mounted
securely. These installation instructions are to be used
as a guide as every installation is different. These
installation instructions are only suitable for installation
on a Masonry wall.
PRODUCT LIMITED GUARANTEE
All components of LIQUID RED stainless steel
bathroom accessory are guaranteed against any
manufacturing defects for a period of 5 years from
date of purchase, as printed on the sales docket,
which must be provided as proof of purchase.
Excluded from this warranty are damages resulting
from force majeure (Acts of God), including but not
limited to lightning and floods, fair wear and tear,
misuse, wilful damage, negligence, repair of device
1a. Tools Supplied: 1b. Fasteners Supplied:
(all other tools shown are not supplied)
(C) x1
(Screw
M4x6)
(A) x1 (B) x1 (D) x1
(2.5mm) (Pin) (Backing Plate)
*Due to the fact that LIQUID RED is always actively researching new methods and/or materials with a view to further improving
our products you may notice some differences between the parts you received and the assembly method described herein.
Please understand that this instruction leaflet is intended as a guide only.
ENGLISH
(BTA-LR3200-VSA-01-v1.1)
for use with UX-8 and CSK Screw 5.0 x 75mm
Thank you for purchasing this
LIQUID RED Product.
without the approval of LIQUID RED or damage
resulting from incorrect installation. The manufacturer's
liability is limited to repair or replacement of the
stainless steel bathroom accessories only. No claim for
consequential damage and/or labour and/or transport
will be entertained. Damages arising from misuse of
the stainless steel bathroom accessories will render
the warranty invalid. This warranty is only valid when
the product has been purchased from an authorised
reseller or country/territory distributor and is only valid
within the geographical borders of the country/territory
that it was originally purchased. This warranty only
extends to the original purchaser of this product and is
not transferable.
NOTE
Products in diagrams used are for graphical
representation only, actual products may vary from model
to model.
(E) x1
(Round
Mount)
(F) x1 (G) x1
(Plastic Wall (CSK Screw
Plug 8mm) 5.0x75mm)
2. Mark position
??
58
3. Drill hole
Ø 8 or 9mm
Pilot Hole = Ø 5.5mm
Sizing Hole = Ø 8.0mm
5. Add Plastic Wall Plug
F
6. Expose ahesive on backing plate
(DO NOT apply to wall, wait for STEP 8)