Installation Of The Machine - Cartft CID700M Manual

Installation of Machine
Cautions
Make Sure Device Connected Correctly according to the Manul before Installing
Use the attached parts to make sure the Correct Connection
Fix all Flex ble power before installing
The Machine should be installed flatly Face upward some angle in order to be used convenient but not too much
Connect the Power from Cathode of battery
There will be some Sparkle If connected from Anode of Battery
Tank Buck Installation in instrument panel f the car and
the fireproofing panel can fix the installing Bolt Choose the
Following Installation
Dismantle the Installing Tank Bucket from the Machine
then Install into Relevant Rotate of the car and fix
Screw the M5 Bolt into screw of the radiator then Screw tightly clockwise
Install the machine into the Tank bucket then
fixe the Pontil on the fireproofing by attached screw

Installation of the Machine

Breech Loading
Dismantle the Tank Bucket and ornament frame
This two kind is of no use
Put the the machine into the install shelf then
adjust the place of the machine according to the place
of the install shelf of the car to make the front panel and
instrument panel ordely
It will be ok after fixing the machine into the install shelf by 4 pcs
Bolt of M5 6
Install shelf of the Car