Power Connections................................4 LEDs......................................5 SA201 Side Ports................................... 7 Chapter 2: Installation....................... 8 Mounting the SA201 Adapter............................8 Chapter 3: Connecting the SA201 unit to the network............12 Chapter 4: Specifications......................13 Chapter 5: Regulatory Information..................14 FCC Declaration of Conformity Statement......................14 Industry Canada Notice..............................15 FCC Radiation Exposure Statement...........................15...
IoT devices. SA201 adapter can be used to provide proxy service for the Defender Adapter Application. SA201 has a full layer 1-7 visibility and can be paired 1:1 with a medical or IoT device in a hospital or campus environment. The SA201 solution capabilities include: •...
The SA201 adapter requires a reboot when the input power source is changed. LEDs LEDs on SA201 Adapter There are LEDs on four of the six sides of the SA201 unit. The figure below shows the LEDs on the front cover of the adapter. Extreme Networks SA201 Defender Adapter...
Page 6
Overview Figure 1: LEDs on front cover of SA201 Power Status PSE Client Port IoT (BLE or 802.15.4) Table 3: SA201 LED Status LED Icon LED Color Description Power GREEN Normal power status Status GREEN Normal operational status AMBER Non-operational status...
Overview SA201 Side Ports The sides ports of SA201 are used to power up and connect the adapter. Figure 2: SA201 Ethernet Port Figure 3: SA201 12V DC Power Supply Port Extreme Networks SA201 Defender Adapter...
Use ESD (Electrostatic Discharge) protection wrist strap when installing the SA201 adapter. Important The SA201 unit may become very warm during normal use. It complies with the user- accessible surface temperature limits defined by the International Standards for Safety (IEC 60950-1 and IEC 62368).
Page 9
Mounting to a wall You can mount the SA201 adapter using the wall mount keyholes in the back of the unit. The keyholes are bidirectional and let the adapter to be mounted in either direction. To mount the SA201 adapter to a...
Page 10
Table 5: Tools Required to mount to a wall Number Description Flat-head screwdriver M4 screws and wall anchors ESD-protective wrist strap (purchased separately) Mark the two hole centers. The two screw centers should be 3.6” apart. Extreme Networks SA201 Defender Adapter...
Page 11
4 Screw in the respective screws into the holes. 5 Attach the SA201 adapter to the screws. Figure 6: Mounting the SA201 adapter to a wall 6 Rock it back and forth to ensure that the unit is secured in place.
Connecting the SA201 unit to the network After installing the SA201 adapter, connect it to the network. Caution Connect the equipment only to an outlet with grounding for additional safety against electric shock when using the protective earthing conductor. Danger...
This device may not cause harmful interference • This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Extreme Networks SA201 Defender Adapter...
The unit and all interconnected equipment must be installed indoors within the same building, including all -powered network connections as described by Environment A of the IEEE 802.3af standard. Qualified Personnel Danger Only qualified personnel should perform installation procedures. Extreme Networks SA201 Defender Adapter...
Declaration of Conformity in Languages of the European Community Hereby, Extreme Networks, Inc. declares that the radio equipment type Wireless Networking Adapter is in compliance with Directive 1999/5/EC. The full text of the EU declaration of conformity is available at the following Internet address: www.extremenetworks.com...