Summary of Contents for i-nstruments DJ-I
- Page 1 DJ-I Analog Midi Controller / Sequencer. USER AND INSTALLATION MANUAL ver 1.2 Page...
- Page 2 1.0 FRONT PANEL 1. ALPS potentiometers. (Traktor: functions of effects’ workbenches DW, Knob 1, 2, 3). 2. LED indicators on potentiometer’s use. Traktor: The central toggle switch commutes the effect’s workbench FX1 and FX2). 3. Infinite Encoder with pressure switch. (Traktor: it edits BPM and if pressed it activates the Sync).
- Page 3 Bluetooth connection). 2.0 INSTALLATION. DJ-I is compatible with all the OSX and MacOS versions that support the MIDI device Class Compliant and with Microsoft Windows 7 and later. It doesn’t need driver installation neither via USB connection nor via Bluetooh connection. ...
- Page 4 Sequencer Slave allows to use the external machines (synthesizers or others) through the analogic midi connections present on the DJ-I’s panel. In this mode, the controller uses the clock that comes from the Traktor to command the sequencer’s pattern and to send externally the command in analogic midi.
- Page 5 3.4 Select the samples’ pages. DJ-I allows to use 4 pages of samples available in the Sample Dock. To each page corresponds a PAD’s color: page 1 blue, page 2 green, page 3 red, page 4 azure. To change the page, it is sufficient to rotate the “A/C”...
- Page 6 “Sending Offset MIDI” Configuration on Traktor: Load 16 identical samples, possibly from a very brief sound (we recommend to use a snare without effects) on the Sample Deck “C”. Activate “Tick” clicking on the right button as in the next picture: Be sure that you can hear “Tick”...
- Page 7 5.1 Play / Stop Press the “B/D” encoder to activate or deactivate the pattern’s scrolling, in the specific this commands the Pay / Stop of the MIDI section of Traktor. In the Sequencer Slave mode, the Midi Clock’s information coming from Traktor are sent to the commands of Play and Stop to the connected machines on the analogic MIDI OUT of the controller.
- Page 8 MIDI NOTE or CC MIDI totally mappable. 7.0 BATTERY When the battery’s level is not sufficient, the led of the switch button will start to blink. The DJ-I battery ensures approximately 12 hours of functioning. The recharge should be done through a USB connection (from a computer or from a charger) and it needs approximately 8 hours to be completed.
Need help?
Do you have a question about the DJ-I and is the answer not in the manual?
Questions and answers