Advertisement
OPERATING INSTRUCTIONS
1. T ransferring media to a computer
and charging the camera battery
Connect the camera to a computer using the
Micro USB cable. The camera will be powered
on and three options will appear on the screen:
USB Mode, PC Camera and Charging Mode.
USB Mode: is used to transfer media from the
camera to a computer. To select the USB Mode
press the Shutter/OK button
PC Camera: is used to access the web camera
on the computer. To select PC Camera press
the Down button once and then press the
Shutter/OK button
Note: This feature is not compatible with all
computers.
Charging Mode: is used to charge the camera.
To select the Charging Mode press the Down
button twice and then press the Shutter/
OK button
.
The Charging Indicator light will flash red to
indicate charging in progress. The light will stop
flashing when charging is complete. Ensure
that the battery is fully charged before use.
.
.
Note:
Charging can also be achieved by
plugging the camera into a USB wall charger. No
mode selection is needed to charge this way.
USB Mode
TF
PC Camera
Charging Mode
USB Mode
TF
PC Camera
Charging Mode
USB Mode
TF
PC Camera
Charging Mode
Advertisement
