CA125AH-01000 Product Information Overview The Conquip Rescue Cage is designed to collect and transport injured personnel from a building structure. The inverted T-shape design gives the stability of a central, 4-point lifting arrangement, whilst allowing the cage to be easily crane lifted in between floor and ceiling levels.
4. When wearing a harness and restraint lanyard, attach the lanyard from the NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries. harness to the anchorage point. (Fig 1)
Your risk assessment will determine the correct Personal Protective Equipment (PPE) for the task you are doing. You must use it. Conquip recommends that you should wear: 9. If you have finished with the cage, detach it from the lifting equipment and •...
If any third-party modifications or alterations, involving drilling, welding, cutting or distortion of materials in any form, are to be carried out on the product, Conquip Engineering Group must provide full written approval •...
In accordance with EN ISO 17050-1:2004 Declaration: As defined by the Machinery Directive 2006/42/EC and subsequent amendments We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets the fundamental health and safety requirements concerning the EU guide line(s), due to their design and manufacture.
Important Notes • This User Guide is for this Conquip product only. • Any movements of the product must be thoroughly planned before the work commences to identify potential hazards and assess risk. • All personnel involved in lifting and transportation of this product must have read this User Guide and must be properly briefed.
Need help?
Do you have a question about the Rescue Cage and is the answer not in the manual?
Questions and answers