Download Print this page

Berger & Schroter 31646 Operating Instructions Manual page 13

Wild game camera

Advertisement

Available languages

Available languages

10. Target recording time
Select "On" if you would like the camera be active during a certain period of time.
Your settings will be stored and activated every day. The camera will not function
outside of this active phase. Selecting "Off" will put the camera into permanent 24
hour active mode.
11. Time-lapse recording
Time Lapse off = off
Time-Lapse on = You can take pictures independently of a movement. Shooting
distance of 0 sec. 24 hours adjustable.
12. Language
You have the option of selecting one of the following languages: English, German,
French, Italian, Dutch, Spanish or Portuguese.
13. Time Date
You can set the date format (YYYY / MM / DD, DD / MM /YYYY or MM / DD /YYYY),
the time format (12/24 hour) and the time and date. Use the Up / Down keys to
change values and the Right / Left key to select between different categories. Con-
firm using the OK key.
14. Photo stamp
This is where you can select whether your photos are stamped with the date and
time, just the date, or with no stamp at all.
15. Password protection
Select "On" if you would like to use a Pin Code for added security. You can select
a 4-figure Pin Code in the screen menu. Once set, this code must be entered every
time the camera is switched on in the SET mode! If you forget the Pin Code, you
can no longer use the camera!
16. Acoustic signal for menu guidance
17. Formatting the Memory Card
Formatting the memory card will permanently delete all data on the card. Before
you insert a new memory card into the camera or a card which has been used in
another device, you should first format it. Select "Yes" with the OK key, and confirm
the following message with OK. The formatting process will begin. While the card
is being formatted it will display the message "Please wait".
18. Return settings to default position
If you select this Menu function and confirm by pressing "Yes", you will delete all
of your camera settings, including the Pin Code, returning the unit to factory default
mode.
13

Advertisement

loading