Rinse/SelfCleaning Cycle - Philips HD8838/04 Operating Instructions Manual

• Remove the water tank from its place.
• Rinse and fi ll it with fresh water mak-
ing sure that it is not fi lled exceeding
the (MAX) level indicated in the tank.
Put the tank back in its place.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
operate the machine if water is not
present: Make sure there is enough
water in the tank.
• Remove the coff ee bean hopper cover.
Note: The hopper may be pro-
vided with different safety
features according to the regula-
tions of the country of use of the
machine.
• Slowly pour the coff ee beans into the
hopper.
Only coffee beans must be
put into the coff ee bean hop-
per. Ground coff ee, instant coff ee or
any other object may damage the
machine.
• Replace the coff ee bean hopper cover.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
• Switch the power button to "I" to turn
the machine on.
• 6 • • 6 •
• The display shows the ON/OFF icon.
Black
• Make sure the selector switch is on "
" position; if necessary, turn it to the
indicated position.
• To turn the machine on simply press the
ON/OFF button.
• The display indicates that the machine
is priming the circuit.
Orange
prime the circuit. For this operation
see section "Control Panel Display".
RINSE/SELFCLEANING CYCLE
This cycle allows rinsing the coff ee circuits
with fresh water.
The cycle is carried out:
• At machine start (with cold boiler)
• After priming the circuit (with cold
boiler)
• During the Stand-by preparation phase
(if a coff ee product has been brewed)
• During the turning off phase after
pressing the ON/OFF button (if a cof-
fee product has been brewed).
A small amount of water will be dis-
pensed to rinse and heat all the machine
components; in this phase this icon is
displayed.
Wait for the cycle to fi nish automatically.
You can stop dispensing by pressing
Orange
either the coff ee button and/or the
ON/OFF button.
Note: In some cases you may
be requested to manually