1. INTRODUCTION Thank you for choosing our CSC series Pure sine wave Inverter with Charger (herein after called CSC). The perfect combination of a pure sine wave inverter and a 3 stage battery charger. When the mains power fails, it converts the battery's DC to AC to support household electrical 1.
4. OPERATION ENVIRONMENT 6. AVS PROTECTION FUNCTION For best operating performance, the CSC should be placed on flat surface, such as ground or ·Lower voltage protection: when the mains power is lower than 170VAC, the CSC shall be shut other solid surface, install the CSC in a location that is: down to protect it.
·Sparking may occur when connecting the unit to the battery, make sure no flammable Stage 1. Constant Current- Rapid charge the fumes are present before making any connections. battery with constant high current. Fit for heavy-loaded condition. ·Please use the DC cables supplied to ensure best performance. Stage 2.
Earth fault protection Unplug the fault load No AC Red and green Strong collision cause output MODIFIED LED lit Contact seller for repairing or change Phase(degrees) SINE WAVE the circuit loosen -360 -270 -180 PURE SINE WAVE AC loads power Use a larger battery or connect more consumption is higher batteries in parallel to increase the...
D. Exposure to unsuitable environment conditions ( including but not limited to damage due Old electrical appliances are recyclable. Do not dispose of them in the domestic waste! to lightning strikes) Take to your local recycling centre. Dispose of the packing material in an environmentally E.
Need help?
Do you have a question about the CSC Series and is the answer not in the manual?
Questions and answers