Gocomma PD218 User Manual

User Guide
Model No. PD218
Please read this User Guide carefully before using this product.

Switch: ON / OFF

Press the switch briefly to turn on the device. Press and hold the switch for 1 second to turn it off.

Sensitivity regulation:

1) User can choose an appropriate sensitivity setting according to volume of the pet's noise.
2) There are 5 sensitivity levels. Press the " " button to cycle through levels 1-5. 5 is the most
sensitive level. The higher the sensitivity, the easier it is to trigger the device.

Function mode:

The following five functions can be converted by pressing Mode button.
1.Warning mode: the anti-barking device will only produce a ticking sound. Switch to this mode
after anti-barking has begun taking effect. Try using this after M mode anti-barking has shown
results.
2.Vibrate mode: the anti-barking device will only vibrate.
Switch to this mode after anti-barking has begun taking effect. Try using this after L mode
anti-barking has shown results.
3.M mode: sound + static. The first & second time the anti-barking device activates, it will
produce a warning beep. The third, fourth, and fifth times, the anti-barking device will produce a
warning beep, and then begin to play weak static. After the fifth time, the device will enter
protection mode. Static electricity is produced 3 times in total.
4.L mode: vibration + static. The first & second time the anti-barking device activates, it will
vibrate as a warning. The third, fourth, fifth, sixth, and seventh times, the device will release a
warning shock first, then generate electricity. After the seventh time, it will enter protection
mode. Static electricity is produced 5 times.
5. Quick Bark Stop Mode: Sound + Vibration + Static shock. The anti-barking device will produce a
beep, vibration warning and static shock. It will enter protection mode after it operates five times.
Static electricity is produced 5 times.
M mode description (L mode the same way):
1) When a dog barks, the anti-barking device will begin by issuing a 2-second warning.
2) If a second bark occurs within 30 seconds, the device will give 3 seconds of warning.
3) If the dog barks for a third time within 30 seconds, the anti-barking device will play a warning
sound for 5 seconds and administer a weak static shock to the dog, to remind the dog to
remember to stop barking when it hears the warning sound.
4) This training will repeat 5 times. The 1-2 times will only issue an audible warning. If the dog
continues barking, it will trigger the 3-5 times sound + static mode. The strength of the static
shock increases with each step, so that it is easy to correct. Please note that electrostatic shock
will not cause harm to pets.
5) With the gradual strengthening of electrostatic stimulation, the dog's memory will be
enhanced, and it will understand that its barking has caused the effects. It will take a period of
training to achieve noticeable anti-barking effects.