1. Manuals
  2. Brands
  3. Jolly Manuals
  4. Barcode Reader
  5. Honeywell
  6. Configuring manual

Jolly Honeywell Configuring Manual

Hide thumbs
1
2

Advertisement

Table of Contents

Configuring the Honeywell for Background Scanning

The instructions below are for computers running Windows Vista or greater, and are only tested with
Lobby Track 7 using the US Keyboard emulation. These instructions are only provided as a guide, and the
full manual for the Honeywell Voyager 1200G can be downloaded from the
Lobby Track version 7 and either the Honeywell Voyager 1200G or 1202G.
1. Set the scanner to USB Keyboard Mode. This mode automatically adds a CR and LF for the
Voyager 1200G and a CR for the Voyager 1202G.
2. Enable Windows Mode Control + X. This will enable the scanner to send the ASCII control
characters for STX (start of text) and ETX (end of text).
3. Add the STX Prefix. This is a series of barcodes that need to be scanned in order.
a. Scan the Add Prefix barcode.
b. Scan 9 twice in order to apply this to all barcode types.
Honeywell
site.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jolly Honeywell

  • Page 1 The instructions below are for computers running Windows Vista or greater, and are only tested with Lobby Track 7 using the US Keyboard emulation. These instructions are only provided as a guide, and the full manual for the Honeywell Voyager 1200G can be downloaded from the Honeywell site.
  • Page 2 Configuring the Honeywell for Background Scanning c. Scan 0 and then 2 in order to add the STX code. d. Scan the Save barcode to add this to the configuration. 4. Add the ETX Suffix. This is a series of barcodes that need to be scanned in order.

Table of Contents