Page 1
E L E C T R O N I C S C A L E S P R O D U C E R RADWAG Wagi Elektroniczne, 26–600 Radom, Bracka 28, POLAND Phone +48 48 38 48 800, fax. +48 48 385 00 10 Sales department: +48 (0-48) 366 80 06 export@radwag.com...
Table of CONTENTS 1. BASIC INFORMATION ......................4 1.1. Intended use ........................4 1.2. Precautions ........................4 1.3. Warranty conditions ......................5 1.4. Information included in the user manual ................5 2. UNPACKING ........................... 6 2.1. Unpacking ......................... 6 3. THE CONSTRUCTION ......................6 4.
CAUTION: Control thermometer is used for MAY type RADWAG moisture analyzers and for MAX and MAC moisture analyzers being in production from 6th June 2013.
1.3. Warranty conditions A. RADWAG is obliged to repair or replace those parts that turn out to be faulty as far as production or construction matter is concerned, B. Defining faulties of unknown origin and setting the ways of their elimination can be done only in a presence of both, the producer and the user.
2. UNPACKING 2.1. Unpacking Control thermometer set is placed in a factory packaging. One must unpack it and take the set out of the equipped with sponge cushions case. It is indispensable to keep the set in the case when it is not used. 3.
Measuring tip is connected to a thermometer head with the use of a silicone cable resistant to temperatures ranging from -60°C to 200°C. If the cable touches surface of lower or higher temperature its insulation can be damaged. Functions: Automatic turn-off system disables the battery from becoming flat. „HOLD”...
Page 8
How to assemble the set inside a drying chamber is to be read beneath, moisture analyzer of MAY series has been used as an example. Step 1. Take the following elements out of the drying chamber: • disposable drying pan •...
Step 3. After the assembling process close the drying chamber and carry out the temperature calibration process. CAUTION: All the steps must be carefully carried out so as not to cause any moisture analyzer mechanism damage. The temperature adjustment and control process depends of the moisture analyzer type and its description is to be found in particular user manuals.
The casing is sensitive to dissolvent. 7. ERRORS DESCRIPTION Factory calibration loss, contact RADWAG company. Low battery charge state, showing in turn with the measurement result. Batteries must be replaced (description is to be found...
8. TECHNICAL PARAMETRES Measuring range -70 ÷ 400 °C range -70 ÷ 199.9 °C — 0.1 °C, Resolution over 199.9°C — 1.0 °C ±0.2 °C -70 ÷ 199.9 °C The device accuracy ±1.0 °C 199.9 ÷ 400 °C Measurement ±0.9 °C -70 ÷...
Page 12
O F E L E C T R O N I C W E I G H I N G I N S T R U M E N T S RADWAG WAGI ELEKTRONICZNE 26 – 600 Radom, ul. Bracka 28 Phone: +48 48 38 48 800, fax.