Download Print this page

Breville Compact Kettle BKE320 Instruction Booklet page 13

Advertisement

CARE, CLEANING & STORAGE
Always switch 'off' at the power outlet and
unplug the appliance from the power outlet
before cleaning.
NOTE
The concealed element in the base of
the kettle is made from high quality
stainless steel. Any brown stains
appearing are the results of mineral
deposits and are not rust.
REMOvAL OF MINERAL dEPOSITS
Mineral deposits in tap water may cause
the kettle interior and water gauge to
discolour over time. This may be removed
by using Breville Kettle Cleaner (BKC250)
or a proprietary kettle descaler which is
available from most leading supermarkets,
department and hardware stores.
BREvILLE KETTLE CLEANER
directions for use:
1.
Add 60ml of Breville Kettle Cleaner to
1 litre of water.
2.
Fill kettle with mixture on a
protected surface.
3.
Bring kettle to boil and let stand for
30 minutes.
4.
Clean spout by using a cloth dampened
with Breville Kettle Cleaner, rub well.
Then wipe off.
5.
Bring the kettle to boil for a second time,
then empty solution.
6.
Fill kettle with fresh water and bring to
the boil, discard boiled water. Now your
kettle is ready to make your next cup of
tea or coffee.
Alternatively:
1.
Fill the kettle until
vinegar and 2 parts water. Boil and allow
to stand overnight.
2.
Empty the solution from the kettle. Fill
the kettle with clean water, bring to boil
and discard the water.
3.
Repeat step 2 and the kettle will be
ready for use.
WARNING
Never immerse the kettle base, switch
area, power base, power cord or power
plug in water, or allow moisture to
come into contact with these parts.
TO CLEAN THE ExTERIOR
The outside of the kettle may be wiped over
with a damp cloth and polished with a soft
dry cloth.
CAUTION
To prevent damage to the kettle do
not use chemicals, alkaline cleaning
agents, steel wool or abrasive cleaners
to clean the inside or outside of the
kettle. Use a mild cleaning agent with
a soft damp cloth.
STORAGE
Ensure the kettle is switched off, clean and
dry before storing. Ensure the lid is closed
and locked securely into place. Wrap the
power cord around the cord storage under
the power base. Stand the kettle upright
on the power base. Do not store anything
on top.
full with 1 part
2
3
13

Advertisement

loading