Kitchener FP100 Instruction Manual

Chicken plucker

Advertisement

Quick Links

Chicken Plucker
Instruction Manual
WARNING:
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious personal injury.
Save these instructions in a safe place and on hand so that they can be read when required.
Keep these instructions to assist in future servicing.
REV 01/09/18

Advertisement

Table of Contents
loading

Summary of Contents for Kitchener FP100

  • Page 1 Chicken Plucker Instruction Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing.
  • Page 2: General Safety Regulations

    GENERAL SAFETY REGULATIONS WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator.
  • Page 3: Technical Details

    INTRODUCTION Thank you and congratulations on purchasing a KITCHENER Chicken Plucker. Your plucker comes complete with everything you need to safely and easily plucking feathers. Please take a few minutes to read through this manual before installation and use. Your chicken plucker is made of the finest materials to ensure extended use for all of your de-feathering processing needs.
  • Page 4: Assembly Instructions

    ASSEMBLY INSTRUCTIONS 1. Follow the instruction, install part #16, part #14, and part #10, align the M8 bolts part #17 and part #18 with threaded holes and screw them tightly. Leg (Part #16) Right leg with wheel (Part #14) Left leg with wheel (Part #10) Bolt 2 (Part #17) Nut 1 (Part #18) 2.
  • Page 5 3. Please install the tub to the bottom plate according to the arrow direction, make the two arrows be directed at each other, so that the proximity switch activated. Lock the tub and fasten gourd buckle. 38mm Finger Buckle Direct at each other PLUCKING INSTRUCTIONS 1.
  • Page 6: After Use

    AFTER USE 1. Turn off the machine, unplug before removing foreign matters. 2. Keep hands out of feather chute. 3. Disassemble all parts and wash thoroughly in soapy water. 4. You must remove all foreign material from all appliance parts. 5.
  • Page 7 EXPLODED AND PARTS LIST Part No. Description Qty. Part No. Description Qty. Buckle clamp Reducer Bolt 2 Screw 2 Nut 1 Botten plate Motor assembly Flat key Screw 1 Wire nail Proximity switch Leakage protector Assy feather pan Over-current protector Feather plate Clevis pin Washer...
  • Page 8 Intradin (Shanghai) Machinery Co., Ltd. meatprocessor@intradinchina.com www.intradin.com Size: 145x210mm 157克铜版纸 REV 01/09/18 M.YBFM259001...

Table of Contents