Westinghouse WES41-3000 Instruction Manual page 4

2) Remove all plastic wraps.
3) Connect the air tube of the chair into the leg and foot massager. Connect the square power cords
together. Make sure they are secured and tight.
IMPORTANT: Avoid bending the air tube.
Leg and foot massager linkage pole installation
a) Take off the middle sleeve, mat, washer, and the hexagonal screw (M8*25) from the massage chair.
b) Install in the same order the middle sleeve, mat, washer, and the hexagonal screw (M8*25) on the
footrest.