Table of Contents
Advertisement
Getting Started
Step 1: Connect the USB Phone to PC
The hardware installation is very simple. All you need to do is to connect the USB phone to the USB
port on your PC with the mini USB cable. The red Status Power LED on the phone will be on.
Step 2: Install the Latest Skype
The USB phone must work with Skype
download the latest version of Skype
However, how to use Skype
TM
Skype
, please visit its official website www.skype.com.
Step 3: Install the USB Phone Driver: CalMe2
You can insert the supplied installation CD into your PC or download the latest version of driver
"CalMe2" from http://www.linksz.net
After the installation, please RESTART WINDOWS.
If CallMe2 is run for the first time, Skype™ will pop up the following window. Please select "Allow
this program to use Skype" as the illustration shown below:
User Manual
TM
TM
Rev. 1.3.0.66 or above. If your Skype
TM
software from its official website www.skype.com.
TM
is not included in this manual. For more detailed information about
- -
TM
is outdated, please
Version 1.1.0.5 2006-06-05
4
Advertisement
Table of Contents
