auna multimedia MVD-420 Manual page 26

Step-By-Step
STEP 1: Remove the two deck screws from the top:
STEP 2: Remove the plastic frame from the front and insert the two key plates into the grooves on both
sides of the chassis until they click. By pulling them out you detach the chassis from the frame:
Mount the metal frame into the appropriate place in your vehicle. Then bend some of the tabs of the frame
to keep it securely in place.
STEP 3: Connect all wires according to the connection diagram (see p. 29). Take the front panel off, to avoid
scratches or other damage due to the installation process.
26