Sanuvox SABER PRO WIRELESS 24V Instruction Manual

REGISTER
YOUR WARRANTY
ONLINE AT
www.sanuvox.com
UV COIL CLEANER WITH WIRELESS LCD DISPLAY
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS PRODUCT.
Read and follow all instructions contained in
this manual before using the product. Failure
to comply with these instructions may result
in personal injuries or damage to the unit or
system.
1. Installation and servicing of air conditioning
and related equipment can be hazardous due
to systems pressure and electrical components.
Only trained and qualified service personnel
should install, repair or service equipment.
2. Untrained personnel can perform basic
maintenance functions such as replacing
lamp(s) and/or filter(s). All other operations
should be performed by trained service
personnel.
3. When working on the unit or system, observe
precautions in the literature, tags and labels
attached to the unit or system, and all other
safety precautions considered as best practices
in the HVAC industry.
Installation Date: _______________
Installer Contact Info.: _________________________________________
SABER PRO WIRELESS 24V
Residential Model

IMPORTANT SAFETY INSTRUCTIONS

4. When
comprise more restrictive installation and/or
certification requirements. The afore mentioned
requirements prevail on those of this document
and the installer agrees to conform to these at
his own expense.
5. Follow all the safety instructions outlined in this
document and respect all local and national
codes applicable.
6. Never expose eyes or skin to ultraviolet light
from any source. Therefore, before installing
or performing maintenance on the unit or
system, TURN OFF AND DISCONNECT the
unit or system from all power sources (there
may be more than one switch to disconnect).
CAUTION: Electrical shock may cause
personal injuries or possibly death.
7. UV rays may destroy certain types of filters
(polymer or plastic); please keep the unit or
system light away from shining directly on
plastic.
Sanuvox Technologies Inc, © 2019 All rights reserved. January 2020 EN v.1
applicable, local regulation
Installed by: _________________
Instruction Manual
may 8. When installing or performing maintenance on
the UV unit or system, it is recommended to
wear safety glasses and gloves. In order to
avoid reduced performance of lamp(s), do not
touch lamp glass without gloves.
9. UV lamps contain a small quantity of mercury:
if a lamp breaks, clean and dispose of with
care. UV lamps can be disposed/recycled after
use, as any other fluorescent lamps. Contact
and follow your local and national authorities'
specific instructions.
10. Use only specified SANUVOX branded
replacement UV lamps with your unit or
system. Use of any other lamps will void your
warranty and can result in damage to the unit,
system and/or lamp(s).
11. Most UV units or systems are not waterproof.
DO NOT INSTALL
specified otherwise.
SAVE THESE INSTRUCTIONS
OUTDOORS unless