Advertisement
Quick Links
V15
Rigging Manual
1
Unpacking and Preparation
2
Assembly
3
Sail Control
4
Launching
1. Unpacking and Preparation
Unpack the major parts listed below and lay them out on a soft piece of
ground free of sharp objects.
To avoid damaging contents, do not cut into packaging.
a. Hull
b. Mast kit which includes:
Rigged mast
Rigged boom
c. Boat kit which includes:
Tiller/Hiking Stick
Daggerboard
Rudder
d. Line bag
Jib sheet
Mainsheet
Daggerboard shockcord
Note: All lines are as long as necessary for maximum purchase. LaserPerformance
encourages you to customize line lengths for your sailing pleasure, but be sure to cut and
burn ends to prevent fraying.
Useful
knots
to know
FIGURE 8 OR
SQUARE KNOT
STOPPER KNOT
Fogh Marine | 416 251-0384 | www.foghmarine.com | info@foghmarine.com
V15
Tools: To rig your V15 the fi rst time,
you will need the following:
•
White electrical tape
•
2 adjustable wrenches and/
or pliers
CLEAT
BOWLINE
CLOVE HITCH
Advertisement
Related Manuals for LaserPerformance V15
Summary of Contents for LaserPerformance V15
- Page 1 Line bag Jib sheet Mainsheet Daggerboard shockcord Note: All lines are as long as necessary for maximum purchase. LaserPerformance encourages you to customize line lengths for your sailing pleasure, but be sure to cut and burn ends to prevent fraying. Useful...
- Page 2 Mainsheet and vang clevis pins out of the spreader brackets. • Th e V15 mainsheet has a bridle spliced into one end that fastens to Spreader installation the stern deck. Locate the thicker end and pass it forward through the block on the end of the boom, through the black strap, through the •...
- Page 3 LaserPerformance equips our Vanguard 15 with the highest quality parts available. We partner with key suppliers so that it fi ts as shown. Pass the tiller between the mainsheet bridles and slide it into the rudder head.
-
Page 4: Maintenance
• All our GRP products are designed to be dry sailed. In other words stored on dry land. If you intend to leave your boat on a mooring for any length of time it is essential that you apply an osmosis barrier coat. LaserPerformance can recommend a suitable product. - Page 5 Laser, SB3, Sunfi sh, and Dart are trademarks used under license. t +971 (4) 885 7601 LaserPerformance reserves the right to make design and/or specifi cation changes to any of their products as part of their continuous LASER PER FOR MANCE.COM development program.
Need help?
Do you have a question about the V15 and is the answer not in the manual?
Questions and answers